Build Your Own Arcade Controls Forum

Software Support => GroovyMAME => Topic started by: petermet on January 14, 2013, 03:05:58 pm

Title: problems with blank display on arcade with Emu crt driver
Post by: petermet on January 14, 2013, 03:05:58 pm

I am rebuilding my mame cabinet and have changed from using Powerstrip to Emu's ATI driver's.

My problem is on Windows boot. I get the 31hz signal (split through Jpac) but when the Emu driver's kick in the screen goes blank. Plugging in my normal computer monitor at that stage does not help (also blank).
If i boot with the computer monitor connected i get the out of range signal once windows has booted, switch to the arcade screen and all working fine.
Any ideas what could be causing this? Also if i boot with groovyarcade the display is fine booting from arcade monitor.

Help please!!!

Title: Re: problems with blank display on arcade with Emu crt driver
Post by: Calamity on January 14, 2013, 06:01:58 pm

You probably need to use the other output (connector) of your video card.