Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Banacek on January 06, 2013, 10:17:49 pm

Title: Plexi mounting on an old NBA Jam cab
Post by: Banacek on January 06, 2013, 10:17:49 pm

Hello! So I have my bezel ordered. The last piece left is to order the plexi/temper glass and mount it. I included pictures of the top and bottom of where it should go. I can see the space at the top where the plexi will slide in. I just can't figure out how to mount the bottom. It looks like there was some sort of bracket at one time, but it didn't come with any bracket. Any help would be appreciated. Thanks!

Title: Re: Plexi mounting on an old NBA Jam cab
Post by: Dr. Willy on January 07, 2013, 12:59:52 pm

yes there is a bracket, i just converted an nba jam cab, i will snap a few pics of it when i get home to show you how it was done.

Title: Re: Plexi mounting on an old NBA Jam cab
Post by: Banacek on January 07, 2013, 04:56:07 pm

Quote from: Dr. Willy on January 07, 2013, 12:59:52 pm

yes there is a bracket, i just converted an nba jam cab, i will snap a few pics of it when i get home to show you how it was done.

Awesome, thanks so much!

Title: Re: Plexi mounting on an old NBA Jam cab
Post by: Banacek on January 10, 2013, 12:28:44 am

Any chance to take those pics? Thanks

Title: Re: Plexi mounting on an old NBA Jam cab
Post by: Banacek on January 12, 2013, 06:01:23 pm

Ok, so I picked up a 1 inch wide aluminum L bracket, cut it, and drilled holes where the wood had holes. It's working great. I just need to paint it black (queue The Stones  ;D )