Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Dr. Willy on January 05, 2013, 05:12:58 pm

Title: Do i have to use coin control mechs for my coin control door?
Post by: Dr. Willy on January 05, 2013, 05:12:58 pm

I have a control door, and its missing one mech, do i have to get coin control mechs for it? or are mechs some what interchangeable?

Also i know happ reject wont fit in the coin control reject button bezel, but if i got happ bezels and reject buttons would they fit my door okay?  or are the bezels different sizes?

here is my coin door

(http://i3.photobucket.com/albums/y77/DuffBeerMan/IMG_0468_zpse77840e6.jpg)

Title: Re: Do i have to use coin control mechs for my coin control door?
Post by: paigeoliver on January 06, 2013, 01:32:38 am

I have a huge box of mechs and they all interchange.

However I can't say the same about the rest of the parts on a coin door. If your door is really stripped with no parts like that picture then you just need to start over with a complete door.

Title: Re: Do i have to use coin control mechs for my coin control door?
Post by: Dr. Willy on January 06, 2013, 02:20:30 pm

 Thanks for the reply, I have all the stuff to the door just missing a coin mech. Only reason I ask about the bezels and reject buttons is cause coin control doors only have red reject buttons and I wanted to change the color of them.