Build Your Own Arcade Controls Forum
Main => Project Announcements => Topic started by: Almighty on December 19, 2012, 01:09:05 am
-
3 weeks ago a bought a 1P mamecade bartop and i really like it!
So my next step is to make a bigger bartop with a 2P control panel and a 19 inch lcd. ( and yes with a slg3000 )
so i can finaly play the games like Streetfighter and Killer Instinct on my next bartop and i can play with my daughter on this baby because she really like to play Turtles with me :)
1P mamecade:
(http://img10.imageshack.us/img10/6425/img1929ms.jpg)
(http://img707.imageshack.us/img707/5690/img1931y.jpg)
see here the mamecade bartop running on youtube:
MameCade bartop tabletop (http://www.youtube.com/watch?v=_kICPVTnBVk#)
See here the 2P version, a lot of work to do ;)
(http://img33.imageshack.us/img33/6909/img1980rd.jpg)
(http://img18.imageshack.us/img18/2559/img1989mj.jpg)
(http://img820.imageshack.us/img820/5734/img2008ek.jpg)
(http://img404.imageshack.us/img404/350/img2006og.jpg)
sticks/buttons and jamma loom :)
(http://img836.imageshack.us/img836/3925/dsc03501k.jpg)
update 02-11-12:
after a lot of work today:
(http://img818.imageshack.us/img818/4178/img2068k.jpg)
(http://img14.imageshack.us/img14/693/img2069wvt.jpg)
(http://img843.imageshack.us/img843/2466/img2071z.jpg)
(http://img12.imageshack.us/img12/9329/img2062q.jpg)
Airflow holes so the heat can get out, control panel, bezel, marquee holder etc.
I hope next weekend i can get they worst part done and ready to paint it 2 times in the primer.
Keep you guys posted.
Cheers ;D
-
small update:
control panel ready, painted one time with primer.
still a lot of work to do.....
keep you posted :)
(http://img62.imageshack.us/img62/6408/img2133s.jpg)
(http://img838.imageshack.us/img838/2479/speakerplaatmdf2.jpg)
(http://img855.imageshack.us/img855/9103/grondverf1xcab.jpg)
(http://img703.imageshack.us/img703/2421/grondverf1xcp.jpg)
(http://img694.imageshack.us/img694/6895/grondverf1x.jpg)
First layer signal red :)
Still some work to do hehe ;)
(http://img716.imageshack.us/img716/6448/frontroodcab.jpg)
(http://img838.imageshack.us/img838/3461/roodbackcab.jpg)
(http://img339.imageshack.us/img339/5481/signaalroodback.jpg)
and there is light :) , also the bezel is ready.
Last layer signal red and looks really shiny :afro:
tested the screen incl. the slg3000 and work perfect.
next steps to do:
-CP
-buttons
-sticks
-marquee incl. black strips/screws
-marquee artwork
-instal the games family with the supergun/psu.
(http://img202.imageshack.us/img202/8030/img2232sb.jpg)
(http://img525.imageshack.us/img525/9787/img2224bu.jpg)
(http://img96.imageshack.us/img96/6606/img2221k.jpg)
(http://img194.imageshack.us/img194/6616/img2228ta.jpg)
(http://img11.imageshack.us/img11/9423/img2237sr.jpg)
keep you guys posted ;)
-
.
-
Good job. This bartop is coming along nicely ! Keep it up ! :applaud: :applaud:
Bookmarked !
-
thanks you guys :)
I hope this weekend i can finish the bartop.
control panel, marquee holder, etc.
keep you guys posted!
(next summer i will build my own custom/deticated Pengo bartop, so if anyone knows where i can buy/find some artwork please let me know :D)
Cheers!
-
(next summer i will build my own custom/deticated Pengo bartop, so if anyone knows where i can buy/find some artwork please let me know :D)
Enjoy. :cheers:
http://vectorlib.free.fr/Pengo/ (http://vectorlib.free.fr/Pengo/)
http://arcadeartlibrary.com/arcade_art/details.php?image_id=919&mode=search (http://arcadeartlibrary.com/arcade_art/details.php?image_id=919&mode=search)
=pengo&search[mode]=any]http://www.gameongrafix.com/index.php?search[terms]=pengo&search[mode]=any (http://www.gameongrafix.com/index.php?search[terms)
=pengo&search[mode]=any]http://www.thisoldgame.com/index.php?search[terms]=pengo&search[mode]=any (http://www.thisoldgame.com/index.php?search[terms)
http://emdkay.net/catalog/pengo-marquee-unofficial-p-704.html (http://emdkay.net/catalog/pengo-marquee-unofficial-p-704.html)
http://emdkay.net/catalog/pengo-marquee-p-157.html (http://emdkay.net/catalog/pengo-marquee-p-157.html)
http://emdkay.net/catalog/pengo-marquee-alternate-p-712.html (http://emdkay.net/catalog/pengo-marquee-alternate-p-712.html)
http://emdkay.net/catalog/pengo-marquee-alternate-p-713.html (http://emdkay.net/catalog/pengo-marquee-alternate-p-713.html)
http://www.arcadeoverlays.com/storefrontprofiles/DeluxeSFItemDetail.aspx?sid=1&sfid=17232&c=0&i=19316752
(http://www.arcadeoverlays.com/storefrontprofiles/DeluxeSFItemDetail.aspx?sid=1&sfid=17232&c=0&i=19316752)
Scott
-
That's some shiny red 8)
Coming along nicely indeed!
-
o.k guys almost done with this project. (95% done) only need the marquee artwork ;)
Here some pictures, enjoy!
(http://img442.imageshack.us/img442/4181/img2270jr.jpg)
and yes! it fits :applaud:
(http://img211.imageshack.us/img211/8663/img2271f.jpg)
only need the marquee art, hope this weekend or maby next week after christmas ;)
(http://img607.imageshack.us/img607/9434/img2272t.jpg)
(http://img824.imageshack.us/img824/3253/img2273nz.jpg)
(http://img339.imageshack.us/img339/5282/img2274x.jpg)
(http://img163.imageshack.us/img163/3531/img2275lw.jpg)
(http://img832.imageshack.us/img832/3649/img2276jz.jpg)
vga incl. scanlines with the slg30000
(http://img834.imageshack.us/img834/3705/img2277l.jpg)
(http://img705.imageshack.us/img705/5348/img2278pr.jpg)
after this i will start with my fav. vertical game 'Pengo!!'
-
Very nice indeed ! :applaud: :applaud:
-
nice work ;D
but what hardware you got there? ???
-
Hardware ? This is a jamma board ! Much more original than PC mobo ! :)
-
nice work ;D
but what hardware you got there? ???
That is a Games family board. (p4 incl. 2100 games)jamma.
Wil use the same board for my vertical setup for Pengo. (60-1 jamma board)
The yellow MameCade using mame/mala.
-
nice work ;D
but what hardware you got there? ???
That is a Games family board. (p4 incl. 2100 games)jamma.
Wil use the same board for my vertical setup for Pengo. (60-1 jamma board)
The yellow MameCade using mame/mala.
Thanks men
It looks like they took. A p.c motherboard And turned it upside down :lol
-
In fact it is a two-layer motherboard. Have got the same Games Family board in my Egret 3 Atomiswave. The 3000 games-in-1 version.
-
http://vectorlib.free.fr/Pengo/
why i can't open this link one time? :cry:
thanks for the link's anyway PL1
-
Could u please give some insight on how you painted that thong it looks great. Type of paint procedure etc
-
Could u please give some insight on how you painted that thong it looks great. Type of paint procedure etc
I will, get back on that o.k ;)
One think for sure, no rush and give the primer the time to dry 24 hours before you do the second layer.
And use some good mdf primer etc.
Will make some pictures from the stuff i used and also will upload a video running this 2P bartop. :)
-
http://vectorlib.free.fr/Pengo/
why i can't open this link one time? :cry:
thanks for the link's anyway PL1
Not sure why you can't open it. :dunno
Just plug Pengo into the search box on the Arcade Art Library (http://arcadeartlibrary.com/arcade_art/index.php?) and you can find the three files from the link that you can't open.
Scott
-
hello,
Maby i have to put a extra paper behind the marquee, because still a lot of light comming out.
MameCade bartop tabletop (http://www.youtube.com/watch?v=SRxNS348dHo#)
Almost done, because the marquee wont fit in one piece. ;)
I have got a red one and a white one, hmmmm.
(http://img69.imageshack.us/img69/4628/mamecaderooda4.png)
(http://img442.imageshack.us/img442/5508/mamecadewitrooda4.png)
Only i need a longer shaft for my sanwa sticks but i can't find them no more, all sold out.
Anyone here know a shop where i can buy them? hollow would be nice to do a led mod 8)
Here 2 more picture's:
(http://img7.imageshack.us/img7/5118/img2292z.jpg)
(http://img195.imageshack.us/img195/3195/img2290iq.jpg)
Cheers Marc. :)
-
Only i need a longer shaft for my sanwa sticks but i can't find them no more, all sold out.
Anyone here know a shop where i can buy them? hollow would be nice to do a led mod 8)
Have you looked here (http://www.paradisearcadeshop.com/en/paradise-arcade-custom-parts/421-sanwa-jlf-stainless-steel-hollow-joystick-shaft.html) on Paradise?
Scott
-
yes, sanwa still one left, need two shaft's.
I think i will buy 2 new sticks (Seimitsu) because they have plenty in stock.
-
i think the red one looks better :)
(http://img717.imageshack.us/img717/4896/img2297gx.jpg)
(http://img835.imageshack.us/img835/7932/img2298xp.jpg)
control panel 100% done!
(http://img850.imageshack.us/img850/9089/img2305mp.jpg)
edit: (some more pictures:)
(http://img268.imageshack.us/img268/1672/img2310fm.jpg)
(http://img811.imageshack.us/img811/5629/img2333r.jpg)
(http://img338.imageshack.us/img338/5885/img2324t.jpg)
ready to.........PLAY!!! :applaud:
Cheers Marc.
-
Cool bartop ! I dig it ! :applaud: :applaud: :applaud:
-
thank you sir :)
Can't wait till summer to make another one ;D
Will post that project also with more pictures and detail etc.
-
Yeah but you've got to make double posting, here and on bartopmania,com, because we love great craftsmanhship and original machines.
BTW, now it's finished do you allow us to post a thread in our nice bartops of the web topic ?
cheers
-
That would be a honor to post it there also, no problem at all ;)
I will check that topic also and maybe i have to make a account also there...
-
You're welcome of course !
Guess it is good to know that new registration come from REAL and known people !
cheers !
Posted ! Here's the link :
http://bartopmania.com/index.php?t=msg&th=86&start=0& (http://bartopmania.com/index.php?t=msg&th=86&start=0&)
-
You're welcome of course !
Guess it is good to know that new registration come from REAL and known people !
cheers !
Posted ! Here's the link :
http://bartopmania.com/index.php?t=msg&th=86&start=0& (http://bartopmania.com/index.php?t=msg&th=86&start=0&)
Hi,
i just want to join bartopmania and after i completed my registration i get this message:
Forbidden
You don't have permission to access / on this server
-
Great job :applaud:
Loving the marquee artwork :notworthy: