Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: madmanlxl on December 14, 2012, 08:52:32 pm

Title: help chassis part missing.
Post by: madmanlxl on December 14, 2012, 08:52:32 pm

Hello,

Can anyone clear this little puzzle I have.

Picked up a RSA a63abg25x screen and it has part of the chassis missing. Whats the part that attaches so I can connect it to a Jamma harness?

(http://imageshack.us/a/img826/2339/img43811.jpg)

Title: Re: help chassis part missing.
Post by: madmanlxl on December 16, 2012, 06:16:45 am

Update :: Fixed it. Was just used to having a plug converter attached. for those that have the same issue. the chassis is a P538 and the setup is as follows

Inside of PCB
_______________________
|   0  0  0  0  0  0   |   0  0  0  |
_______________________

Outside of PCB

Left to right.

Red | Green | Blue | Ground | Spare | Spare | Empty | Spare | Spare | Sync |



Hope that helps anyone else that doesn't have a cable convertor.