Build Your Own Arcade Controls Forum

Arcade Collecting => Restorations & repair => Topic started by: SailorSat on November 29, 2012, 04:08:03 pm

Title: Daytona USA "classic" - Physics gone haywire
Post by: SailorSat on November 29, 2012, 04:08:03 pm

Hi folks,

I suppose to have one of those dreaded CPU board defects.
The physics on my Daytona started to fail.

I've uploaded a (rather bad quality) video of the problem at
http://images.arianchen.de/for-amusement-only/daytona/im000104.mpg (http://images.arianchen.de/for-amusement-only/daytona/im000104.mpg)

I don't know if this is just a defective chip (may be some address decoder) or just a bad solder connection.
I've search the net but can't find a problem like mine.

Anyone ever seen something like that?

Graphics are fine, but Physics are totally borked.
If I turn my Wheel (while standing still) I can see my tires explode at about 45°.
Also all cars hit invisible walls everywhere.

*EDIT*
TGP Test shows all 4 TGPs as OK
Memory Test also shows everthing as OK.

Title: Re: Daytona USA "classic" - Physics gone haywire
Post by: adder on December 01, 2012, 09:33:40 pm

hihi SS :)

perhaps try one of the links below for tech help:

http://www.ukvac.com/forum/tech-maintenance-repairs_forum2.html (http://www.ukvac.com/forum/tech-maintenance-repairs_forum2.html)

http://www.jammaplus.co.uk/forum/forum_topics.asp?FID=12 (http://www.jammaplus.co.uk/forum/forum_topics.asp?FID=12)

Title: Re: Daytona USA "classic" - Physics gone haywire
Post by: MartinJames on June 11, 2013, 01:31:13 pm

This is the video board without a doubt. Its  the lockheed Martin Chip.