Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: mebronx2000 on November 28, 2012, 08:28:16 pm

Title: 60 in 1 board
Post by: mebronx2000 on November 28, 2012, 08:28:16 pm

i am looking to make a cab with a 60 in 1 board does anyone know how to hook up joysticks and buttons? do i need an jpac or something and i want to use a coin mech and help please thanks :banghead: :cheers:

Title: Re: 60 in 1 board
Post by: selfie on November 28, 2012, 08:37:47 pm

The 60in1 I used worked with a plain jamma harness

Title: Re: 60 in 1 board
Post by: mebronx2000 on November 28, 2012, 08:47:18 pm

i have an empty cab i want to know how i would hook up the joysticks and buttons !

Title: Re: 60 in 1 board
Post by: ccmathome on November 28, 2012, 09:34:20 pm

Google jamma pinout or if you have the booklet that comes with the 60in1 it's all in there

Sent from my SCH-M828C using Tapatalk 2

Title: Re: 60 in 1 board
Post by: CheffoJeffo on November 29, 2012, 06:40:22 am

Quote from: mebronx2000 on November 28, 2012, 08:47:18 pm

i have an empty cab i want to know how i would hook up the joysticks and buttons !

You need to wire the can up JAMMA.

http://wiki.arcadecontrols.com/wiki/JAMMA (http://wiki.arcadecontrols.com/wiki/JAMMA)

http://homearcade.org/BBBB/buildit.html (http://homearcade.org/BBBB/buildit.html)

Title: Re: 60 in 1 board
Post by: CraftyMech on November 29, 2012, 12:13:58 pm

As everyone else has said, get a Jamma harness and you are set. They can be had on eBay for $10-15 including shipping. The harness has connections for everything from the coin slots to the service switch.

Title: Re: 60 in 1 board
Post by: CheffoJeffo on November 29, 2012, 12:35:10 pm

Additional note: be sure to wire up the TEST and SERVICE switches for easier access to the configuration menus. I mount mine just inside the coin door for easy access.

Title: Re: 60 in 1 board
Post by: mebronx2000 on November 29, 2012, 06:03:59 pm

thanks everyone for your help  :notworthy: :cheers: