Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Brewer on November 17, 2012, 08:15:38 pm
-
So I've been working to rebuild my Silver Strike game. I had it working and it has decided to stop working on me. It goes through all of the "linux" checks when booting and goes to the Load Game start screen. The errors show in the attached picture are then output and it begins the boot process all over again. Any help would be appreciated.
-
Update: So I was able to acquire a new hard drive with the 2009 software loaded on it and try it. I get the same exact error when it gets to the loading game screen leading me to believe the original hard drive is good. To further elaborate, when this first happened, the video on the monitor was offset to the right and unable to come back to the center of the screen via adjustments on the monitor. I tried pressing the service button to get into the video options and it froze the game up at which point I powered it down for a reboot. When it tried to reboot, no video was being displayed. I removed the video card from the AGI slot and ran it on the port built into the motherboard. That restored video but results in showing me the error I have posted. Would this be caused by a bad power supply is it a good possibility my motherboard had taken a crap?
This is a 2009 upgrade/conversion from a 2007 game running the Nighthawk system. The pictures that Dardoon posted in his video stutter thread are of the same system that I am using http://forum.arcadecontrols.com/index.php/topic,123287.0.html. (http://forum.arcadecontrols.com/index.php/topic,123287.0.html.) Any help would be awesome!