Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: b3dr0ck on November 09, 2012, 11:03:01 pm

Title: Street fighter II CE Jamma board troubleshooting
Post by: b3dr0ck on November 09, 2012, 11:03:01 pm

I picked up a used Street Fighter II  Jamma/PCB.

I plugged it up to a working JAMMA cab.  The screen comes up, but the graphics are messed up some.  It's like some letters are missing, and blocks of graphics.  It's not a monitor problem.  I can post a video if interested.

There are 3 PCB's on top of each other, it looks in good condition, but I'm not sure if a IC is not seated properly, or what.

Any ideas?

Title: Re: Street fighter II CE Jamma board troubleshooting
Post by: paigeoliver on November 09, 2012, 11:56:20 pm

The thing about most wonky PCBs is that if you can't personally repair them it is usually cheaper to buy a working one that it is to get the one you have repaired.