Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: stpcore on November 03, 2012, 01:11:12 pm

Title: WTB: PGA Tour Golf tower computer by Global VR & EA Sports (Chicago, IL)
Post by: stpcore on November 03, 2012, 01:11:12 pm
I recently purchased a gutted cab PGA Tour Golf cabinet and I would like to put a PGA Tour Golf Team Challenge back in there.  If you have the PGA computer tower or upgrade kit to go to "TEAM CHALLENGE" please let me know.  Even if you have a hard drive or some pieces from the original tower I may be interested if I can piece together a computer one part at a time.  A marquee, control panel, etc might interest me as well.  Thanks!
Title: Re: WTB: PGA Tour Golf tower computer by Global VR & EA Sports (Chicago, IL)
Post by: ed12 on November 03, 2012, 01:52:16 pm
hi
stpcore
all u really need is the dongle and i/o card
the i/o card is truley all that is needed
the dongle can be bypassed by call into hercules
if u are not sure then get a dongle also
the motherboard is not really that specific
the video card is truly becomming not specific also
but the i/o card is needed to interface your control panel-coindoor etc
a harddrive of 40 meg will do just fine
mobo speed is a q,but all the 1's i have seen use both north and south bridge,but then i have replaced that nasty mobo with a single bridge unit
as the s/w dose not call to the mobo :expect: normal bios boot
the program run's on a chopped down window's-xpe platform,with hercules making all the call's
i did not try to hijack the thread but i want u to be clear on what to buy

ed
Title: Re: WTB: PGA Tour Golf tower computer by Global VR & EA Sports (Chicago, IL)
Post by: stpcore on November 03, 2012, 05:44:35 pm
Thanks, Ed as always.  PM sent to you.