Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: SirPeale on October 17, 2003, 05:02:16 pm

Title: 7/8" Barrel Locks
Post by: SirPeale on October 17, 2003, 05:02:16 pm: 7/8" Barrel Locks for sale, double bitted, keyed alike.

(http://www.pealefamily.net/arcade/lock.jpg)

$4.00 each shipped in the US 48.
Title: Re:1 1/8" Barrel Locks
Post by: Xphile on October 18, 2003, 08:41:50 pm: Quote from: Peale on October 17, 2003, 05:02:16 pm
Going to be purchasing some rather soon, thought others would also need them. Looking to gauge interest so I know how many to order.

holy crap, that's a HUGE lock...are you sure it's not 3/4 or 7/8 barrel locks?

;)
Title: Re:1 1/8" Barrel Locks
Post by: SirPeale on October 19, 2003, 09:25:59 am: AFAIK, it refers to the length of the lock, not the width. Commonly used on coin doors and back panels.
Title: Re:1 1/8" Barrel Locks
Post by: Wienerdog on October 19, 2003, 03:07:02 pm: Quote from: Xphile on October 18, 2003, 08:41:50 pm
holy crap, that's a HUGE lock...are you sure it's not 3/4 or 7/8 barrel locks?

Huge lock? I was thinking that is a tiny barrel. Who needs to lock a 1 1/8" barrel?
;)
Title: Re:1 1/8" Barrel Locks
Post by: Xphile on October 19, 2003, 11:15:10 pm: Quote from: Peale on October 19, 2003, 09:25:59 am
AFAIK, it refers to the length of the lock, not the width. Commonly used on coin doors and back panels.

ok...but I've seen 3/4 and 7/8 wide, and you didn't specify width..:-)

(I ended up with a 2 gallon pail of locks and keys when I bought a pallet of arcade "stuff"..I still haven't matched them all up...job and a half that is..I'll prolley end up with 1 gallon of keyed barrel locks of different sizes/styles..:-)
Title: Re:7/8" Barrel Locks
Post by: Nannuu on October 22, 2003, 10:21:56 pm: I could do with 6 right now. Maybe even more after the next auction :D
Title: Re:7/8" Barrel Locks
Post by: CitznFish on November 04, 2003, 01:29:18 pm: I'd take 10 if they are keyed alike.
Title: Re:7/8" Barrel Locks
Post by: Nannuu on November 05, 2003, 02:49:53 pm: I'll take 10 instead of 6 if it helps any.
Title: Re:7/8" Barrel Locks
Post by: barfybuffet on November 11, 2003, 12:18:20 pm: i could use 4 of them.
i see no mention of costs involved.. how much?
Title: Re:7/8" Barrel Locks
Post by: DarkKobold on November 11, 2003, 12:25:53 pm: I'll take 3 if they aren't too much, and are keyed alike.
Title: Re:7/8" Barrel Locks
Post by: SirPeale on November 11, 2003, 01:05:08 pm: Sorry, should have mentioned prices sooner. $4.00 each shipped, all keyed alike.
Title: Re:7/8" Barrel Locks
Post by: JQ on November 12, 2003, 02:02:57 pm: I could use 2 of those.

Daniel
jq9@hotmail.com
Title: Re:7/8" Barrel Locks
Post by: mushmouth on November 17, 2003, 11:29:06 am: If these will work on a midway pac cab back door and coin door, I'll take 2...
Title: Re:7/8" Barrel Locks
Post by: SirPeale on November 17, 2003, 05:20:00 pm: Quote from: mushmouth on November 17, 2003, 11:29:06 am
If these will work on a midway pac cab back door and coin door, I'll take 2...

As long as the originals were 7/8", it will work just fine.
Title: Re:7/8" Barrel Locks
Post by: slycrel on November 30, 2003, 02:23:13 pm: Would these work with a stern coin door?

I'll have a for sure answer for you in the next few days. I have 2 places left to look at a cabinet, if I don't find anything it will be 100% custom built. =)

Thanks.
Title: Re:7/8" Barrel Locks
Post by: SirPeale on November 30, 2003, 02:32:20 pm: Quote from: slycrel on November 30, 2003, 02:23:13 pm

Would these work with a stern coin door?

I'll have a for sure answer for you in the next few days. I have 2 places left to look at a cabinet, if I don't find anything it will be 100% custom built. =)

As long as the original was 7/8" it should. Got a picture?
Title: Re:7/8" Barrel Locks
Post by: slycrel on November 30, 2003, 03:06:55 pm: Bleh. After re-measuring, it liiks like it's 3/4" not 7/8". I was originally worried about the straight lines that it had there.
Title: Re:7/8" Barrel Locks
Post by: SirPeale on November 30, 2003, 04:26:18 pm: The 7/8" refers to the length of the lock, not the width. I believe it's a standard size. I'll go measure mine to check.

(after) Yes, mine measure the same as yours. AFAIK, it's a standard size.
Title: Re:7/8" Barrel Locks
Post by: CitznFish on December 03, 2003, 01:24:38 pm: Peale,

how many are we short before the order can be placed?
Title: Re:7/8" Barrel Locks
Post by: eightbit on December 03, 2003, 01:33:01 pm: Do you have these or are you looking for pre-orders? I need some but can't wait for a group buy.
Title: Re:7/8" Barrel Locks
Post by: ntjedi on December 03, 2003, 01:47:19 pm: I can use 4 of them ;D
Title: Re:7/8" Barrel Locks
Post by: SirPeale on December 03, 2003, 02:30:15 pm: We're up to 41 (counting the number here on the board) and I think that's close enough. I'm placing the order today.
Title: Re:7/8" Barrel Locks
Post by: slycrel on December 03, 2003, 05:11:13 pm: In that case, put me down for 3. =)
Title: Re:7/8" Barrel Locks
Post by: SirPeale on December 03, 2003, 06:19:18 pm: Good news, everyone! The distributor called and said they were out of single bitted locks. They have upgraded to double bitted for the same price.
Title: Re:7/8" Barrel Locks
Post by: ntjedi on December 03, 2003, 07:31:31 pm: Woo-Hoo!!! ;D

Yeah, im a dork. ::)
Title: Re:7/8" Barrel Locks
Post by: CitznFish on December 04, 2003, 12:52:12 pm: Quote from: Peale on December 03, 2003, 06:19:18 pm
Good news, everyone! The distributor called and said they were out of single bitted locks. They have upgraded to double bitted for the same price.

Can i be the first to say, WhatchutalkinboutWillis?

I have no idea what single or double bitted locks are.
Title: Re:7/8" Barrel Locks
Post by: ntjedi on December 04, 2003, 01:00:35 pm: Quote from: CitznFish on December 04, 2003, 12:52:12 pm
Quote from: Peale on December 03, 2003, 06:19:18 pm
Good news, everyone! The distributor called and said they were out of single bitted locks. They have upgraded to double bitted for the same price.

Can i be the first to say, WhatchutalkinboutWillis?

I have no idea what single or double bitted locks are.

A single bit lock only has tumblers on one side while a double bit lock has both. If you look at a standard house key, it is a single bit with a smooth side and the "rough" side. A double bit has two "rough" sides on the key.

I hope this helps.
Title: Re:7/8" Barrel Locks
Post by: pepsidx20 on December 04, 2003, 02:57:45 pm: I will take 2 also please. Just let me know where to send you the M.O
Title: Re:7/8" Barrel Locks
Post by: SirPeale on December 04, 2003, 03:44:20 pm: We'll just wait until I get them before I start 'taking orders.' Should be Monday.
Title: Re:7/8" Barrel Locks
Post by: SirPeale on December 09, 2003, 01:41:09 pm: Yep! It was Monday. I'll be posting when I'm ready to 'take orders'
Title: Re:7/8" Barrel Locks
Post by: SirPeale on December 10, 2003, 11:33:39 am: I've sent a PM to all those who wanted a lock.
Title: Re:7/8" Barrel Locks
Post by: SirPeale on December 11, 2003, 01:13:03 pm: These are quite nice. I just outfitted my cabinet with a couple. Quite snug.
Title: Re:7/8" Barrel Locks
Post by: ntjedi on December 16, 2003, 10:39:04 am: Great Locks. Got mine yesterday and they look great in the cabinet. Its amazing how the little things can really put a shine to your games.

Thanks for all your effort in the Peale. You da man. 8)

If you havent got your yet I highly recommend them. These are great locks and at a great price (IMO). ;D
Title: Re:7/8" Barrel Locks
Post by: mushmouth on December 16, 2003, 12:30:14 pm: Ntjedi, I AGREE.

I ordered a pair of these, as well as a couple of coin mechs and they got here QUICK. I hope more people order some of these. I'd like to think that staple items like these will continue to be offered on here by people like Peale. Quick disconnects, barrel locks, coin mechs... Yeah you can find this stuff, but Peale, bro, you make it really easy and AFFORDABLE.

Thanks man.
Title: Re:7/8" Barrel Locks
Post by: SirPeale on December 16, 2003, 12:43:24 pm: Thanks a lot guys, it means a lot.

Some of the people who were interested in these locks have not yet spoken up. I still have quite a few available.
Title: Re:7/8" Barrel Locks
Post by: slycrel on December 17, 2003, 11:40:51 pm: I'll let you know how mine go. I'm eagerly checking the mail for them. ;D
Title: Re:7/8" Barrel Locks
Post by: CitznFish on December 19, 2003, 06:00:39 pm: I got my locks yesterday. Peale is a class act, very easy to deal with. :) Thank you Peale.

P.s. My dogs LOVED the bubble wrap!
Title: Re:7/8" Barrel Locks
Post by: SirPeale on January 28, 2004, 11:12:04 am: I've still got a few left. Who wants some?
Title: Re:7/8" Barrel Locks
Post by: Buddabing on January 28, 2004, 11:52:09 am: Quote from: Peale on January 28, 2004, 11:12:04 am
I've still got a few left. Who wants some?

Do they work with coin doors?
Title: Re:7/8" Barrel Locks
Post by: SirPeale on January 28, 2004, 12:52:57 pm: They're FOR coin doors. Well, back doors too I suppose, if your back door locks.
Title: Re:7/8" Barrel Locks
Post by: Stingray on January 28, 2004, 01:04:32 pm: I'll take one if you still have some. Do you have a paypal account?

-S
Title: Re:7/8" Barrel Locks
Post by: SirPeale on January 28, 2004, 01:32:56 pm: Quote from: Stingray on January 28, 2004, 01:04:32 pm
I'll take one if you still have some? Do you have a paypal account?

Check your PM.
Title: Re:7/8" Barrel Locks
Post by: Stingray on January 28, 2004, 02:34:44 pm: Didn't get one from you. Feel free to email me. stingrayg4@prodigy.net

-S
Title: Re:7/8" Barrel Locks
Post by: Buddabing on January 28, 2004, 02:38:39 pm: Quote from: Peale on January 28, 2004, 12:52:57 pm
They're FOR coin doors. Well, back doors too I suppose, if your back door locks.

Great, I'll take two, please PM me with your address so I can mail you payment.
Title: Re:7/8" Barrel Locks
Post by: AlexC on January 28, 2004, 03:53:31 pm: I'll buy one as well if there are any left.
Thanks.
Alex
Title: Re:7/8" Barrel Locks
Post by: SirPeale on January 28, 2004, 04:15:55 pm: Quote from: AlexC on January 28, 2004, 03:53:31 pm
I'll buy one as well if there are any left.

Check your PM.
Title: Re:7/8" Barrel Locks
Post by: mmmPeanutButter on January 28, 2004, 08:21:17 pm: Got my locks. Fantastic!!

Peale for president!! ;D
Title: Re:7/8" Barrel Locks
Post by: Sephroth57 on January 31, 2004, 08:56:01 pm: still selling these? i just picked up a gauntlet dark legacy came with no locks, Ill be needing 4 =) let me know
Title: Re:7/8" Barrel Locks
Post by: SirPeale on January 31, 2004, 09:49:31 pm: Sure am. Let me know.
Title: Re:7/8" Barrel Locks
Post by: CCM on February 05, 2004, 01:34:16 pm: I'll take 4, if you still have some left...
Title: Re:7/8" Barrel Locks
Post by: SirPeale on February 05, 2004, 02:00:24 pm: I don't think I have enough, but I can certainly reorder.