Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: soslo on October 17, 2003, 02:39:18 pm

Title: Happ Marquee Retainer...seems kinda odd
Post by: soslo on October 17, 2003, 02:39:18 pm: Here is the link:
http://www.happcontrols.com/amusement/acesor/49100000.htm

I am the proud owner of 20' of this stuff...but it seems a little odd I guess. I'm not quite sure how to use it. I mean, I could just screw it down to the cab so that it pinches the plexi on...but I was hoping some something a bit more...professional than that. Any ideas? or am I just using this stuff wrong?
Title: Re:Happ Marquee Retainer...seems kinda odd
Post by: Inaba on October 17, 2003, 02:56:48 pm: Nope that's right...

Just drill holes into your marquee top and bottom and the plexi is "pinched" between teh wood and the retainer.

It looks really good when applied. I used gold screws to screw it down.
Title: Re:Happ Marquee Retainer...seems kinda odd
Post by: ntjedi on October 17, 2003, 03:07:36 pm: I hate when its pinched between the wood and the retainer.... oh.... um.....

;D
Title: Re:Happ Marquee Retainer...seems kinda odd
Post by: soslo on October 17, 2003, 04:58:38 pm: ok, thanks for the vote of confidence. I'll probably use black screws tho ;)
Title: Re:Happ Marquee Retainer...seems kinda odd
Post by: tmasman on October 17, 2003, 05:31:36 pm: Quote from: Inaba on October 17, 2003, 02:56:48 pm
Just drill holes into your marquee top and bottom and the plexi is "pinched" between teh wood and the retainer.

You aren't saying "drill holes into your marquee" are you?
Just in case... You drill holes in the top of the cabinet & in the speaker panel...
See picture...
It's the side view of that area...
Brown = Cabinet wood
Black = Retainer
Red = Where screws go
Light Blue (cyan) = marquee
Title: Re:Happ Marquee Retainer...seems kinda odd
Post by: soslo on October 17, 2003, 05:47:31 pm: tmasman - right, I am not actually going to drill into the marquee ;]

I would love it if the reatiner was angled like your picture...but in reality, it is more like this:
Title: Re:Happ Marquee Retainer...seems kinda odd
Post by: tmasman on October 17, 2003, 05:57:58 pm: yeah... They did that so it would work with just about any angle...
Me?
I'd rather find some window trim @ HD & use that...
It's got more of a right angle to it.
That, or the alluminum angle they have...
I haven't used it yet, but it looks like it would work pretty well.
Title: Re:Happ Marquee Retainer...seems kinda odd
Post by: Inaba on October 17, 2003, 09:17:00 pm: Oops... yea, I meant marquee retainer, not the marquee itself!

Sorry about that!
Title: Re:Happ Marquee Retainer...seems kinda odd
Post by: grafixmonkey on October 18, 2003, 01:01:12 am: Would it look just as good to go to a hardware store and get a long metal angle-piece? People say that stuff is expensive as heck to ship, and it looks like it's pretty close. (just needs a few custom holes drilled in it)
Title: Re:Happ Marquee Retainer...seems kinda odd
Post by: Carsten Carlos on October 19, 2003, 07:27:22 am: I got two alu-angles for this - but luckily I had someone who could make these for me. If you get a long metal-angle, go for it!
Title: Re:Happ Marquee Retainer...seems kinda odd
Post by: OSCAR on October 19, 2003, 02:35:37 pm: Quote from: grafixmonkey on October 18, 2003, 01:01:12 am
Would it look just as good to go to a hardware store and get a long metal angle-piece? People say that stuff is expensive as heck to ship, and it looks like it's pretty close. (just needs a few custom holes drilled in it)

Better, actually, IMO. This has been discussed numerous times, too. Check out some of these old threads.

http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=4010

http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=9978

http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=6567

I'm sure there are many more threads on using aluminum angle for a marquee retainer because it is a pretty common topic/question, those are just the first three that popped up on my search.