The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: Byte Knight on October 11, 2003, 03:43:18 pm

Title: 27" Vision Pro Monitor Help
Post by: Byte Knight on October 11, 2003, 03:43:18 pm

I just got a new 27" Vision Pro Monitor from Happ Controls.  The monitor looks good except for a light area several inches in diameter at about 10:00 when the monitor is on.  It is most noticeable when the color is red and this area shows up purple.  I've tried degaussing several times with no improvement.  There are no speakers nearby and the problem persists if I move the monitor.  Any suggestions?

Thanks

Todd

Title: Re:27" Vision Pro Monitor Help
Post by: Pixelhugger on October 24, 2003, 01:20:27 pm

Have you tried tilting it at an angle? Say 45 deg? I know some image abberations have been solved with the WG 9200 that way. Sorry...that's all I've got  :-\

Title: Re:27" Vision Pro Monitor Help
Post by: Pixelhugger on October 24, 2003, 01:23:42 pm

Have you tried tilting it at an angle? Say 45 deg? I know some image abberations have been solved with the WG 9200 that way. Sorry...that's all I've got  :-\