Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Qzar_Toledo on September 05, 2012, 06:39:44 pm
-
Hello! I have a Treasure Chest crane that was purchased at auction. I have no idea what year it is. The board with the dip switches is printed with: GS20010103 Rev. 0 (pic included)
Right now it is .50 per play. We wanted to make it 1.00 per play, but no matter what combo I change the dipswitches to it will only be .25 or .50 per play.
I've seen a few posts regarding this topic - so sorry to re-hash! I tried to use this: http://forums.arcade-museum.com/showthread.php?t=180930 (http://forums.arcade-museum.com/showthread.php?t=180930) and it didnt work - but it only shows setting for 2 set of switches, and there are 3 on mine.
Any help would be appreciated! Thanks for looking at my post.
-
Here you go!
http://www.sendspace.com/file/ngnqj4 (http://www.sendspace.com/file/ngnqj4)
click on *Click here to start download from sendspace * to download the .pdfs. Left side is in English
-
Any chance you can repost that manual? I have that same board set and the link is dead.
-
There's probably better out there but a five minute search turn this up: http://forums.arcade-museum.com/showthread.php?t=180930 (http://forums.arcade-museum.com/showthread.php?t=180930)
-
Yeah I saw that one. This board has 3 dip switch banks not 2. It's exactly as pictured above. Those switch settings don't seem to work correctly. I also would need the claw strength setup procedure. Thanks for checking though if you see anything else I'd be happy to check it out.
-
a=it is the wrong rom for what u want to do
copy it send it to me pm or e-me it
edwarddowney@hotmail.com i will patch it for u
PLEASE in the e-me tell me what u want c$-eng-plnd$-usd$
next u have a set of pots that should set your claw current
>hold-in-current<
another 1 sets the volume
the other 1 sets the time
if they are not there?
then u will need to do few more steps
ed