The NEW Build Your Own Arcade Controls
Main => Project Announcements => Topic started by: BadDude on September 04, 2012, 03:00:19 am
-
This is my first project and i got lots of help from reading posts on this forum. So i thought i would share.
The only thing i have left to do is get the CP art and Marque printed out on quality paper. right now its printed on a home printer and sliced and glued together. And also do some custom airbrushing on the sides, just unmotivated after the grueling building process.
(http://i.imgur.com/MDCew.jpg)
(http://i.imgur.com/k61y3.jpg)
(http://i.imgur.com/JPwIX.jpg)
(http://i.imgur.com/Hd63k.jpg)
(http://i.imgur.com/Nkfnm.jpg)
(http://i.imgur.com/sV3o6.jpg)
Thanks for all the tips gained from this site!
-
Before you send that CPO off to the printer, are you ABSOLUTELY CERTAIN you want the sticks/buttons covering the faces?
[/pet_peeve]
Other than that, it looks great.
Scott
-
Yea that CPO looks bad with the joysticks and buttons smack dab in the middle of their faces....
-
It's ok if the joystick is over the nose and the buttons cover the eyes, but it's tricky to play that way.
I'd have to agree. Have any other artwork ideas for the CP? The marguee is cool showing the character faces, so it's a little bit redundant showing faces again on the CP.
-
.
-
Nice work, but the arrows in the face of Ken and the joystick in his mouth is a bit... :censored:
What kind of screen in there?
-
Thx guys I will think about changing the CP in the future but I guess it just dosent bother me. But appreciate the constructive criticism. For the speaker I will change that. The monitor is a 27" Samsung old school (newer) tv conectes by svideo. Thx again.