Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: wcndave on August 31, 2012, 02:41:16 pm

Title: T-Track and Plexi Overlay
Post by: wcndave on August 31, 2012, 02:41:16 pm

T-Trac is 3/4" right?
Ply/MDF is 3/4"

so that marries up perfectly, however when you have cut and put a plexi overlay on the control panel, that will add 1/8" or so.

How do you pros blend that nicely with the end?

many thanks

Dave

Title: Re: T-Track and Plexi Overlay
Post by: dfmaverick on August 31, 2012, 03:22:33 pm

5/8" MDF for the CP top only.

Title: Re: T-Track and Plexi Overlay
Post by: PL1 on August 31, 2012, 09:16:55 pm

You can lose the plexi and use a .08" polycarbonate-laminated printed-vinyl overlay (http://www.gameongrafix.com/products/control-panel-custom-design) on 3/4" MDF instead.


Scott