Build Your Own Arcade Controls Forum

Front End Support => MaLa Frontend => Topic started by: EvanW on August 13, 2012, 03:27:32 pm

Title: Epsxe won't diplay in Mala properly
Post by: EvanW on August 13, 2012, 03:27:32 pm

Gents,

Not even sure if this belongs in the Mala forum. If it doesn't please move with my apologies. I am running Mala 1.74. When I try to load up a Playstation iso through Mala through epsxe the game starts but won't display. All I get is horizontal banding across the screen. This is the same for PS2. I am using a Makvision tri-sync crt monitor (640x480) with an Arcade VGA. Games in Mame and Daphne work fine. Is there maybe a setting that is not checked off? I have selected:

External SPU Plugin 1.41
Moobys CD Image Drive 2.8
Pete's OpenGL 1.71

Any thoughts?

Thanks for any help.

Evan

Title: Re: Epsxe won't diplay in Mala properly
Post by: harveybirdman on August 13, 2012, 09:46:18 pm

Is it working outside of Mala?


Have you tried the command line settings in this thread?

http://forum.arcadecontrols.com/index.php/topic,93781.0.html (http://forum.arcadecontrols.com/index.php/topic,93781.0.html)

Title: Re: Epsxe won't diplay in Mala properly
Post by: EvanW on August 13, 2012, 11:06:26 pm

Does not work outside on MALA either. It finds the image fine and loads it. Just won't display it properly. I was looking in the configs for an option to maybe change the output resolution settings? My thinking was that maybe it's running at something outside of the monitors tri-sync settings? I get the same problem with MACH 3. Loads up fine and I can start to play it (well I can hear it playing), just can't see anything as the screen goes haywire with horizontal lines. I thought that buying an authentic CRT arcade monitor would display everything and give me that authentic arcade feel and look.

Title: Re: Epsxe won't diplay in Mala properly
Post by: harveybirdman on August 13, 2012, 11:26:55 pm

what's the lowest resolution your version of Pete's OpenGL will do?

Title: Re: Epsxe won't diplay in Mala properly
Post by: EvanW on August 14, 2012, 11:35:26 am

Pete's OpenGL Driver 1.76 and Pete's OpenGL2 Driver 2.8 are the only options.

I actually just got it working. I must have been at it too late last night. In the 1.76 config options I set the default to "Nice" and changed the desktop resolution to 640x480 to match my monitors setting. Everything loads and works great now!

MACH 3 still does not display properly though. But the Nintendo, PS1, PS2 and the rest all finally load and display properly.

Thanks for the help!