Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: mytymaus007 on July 09, 2012, 03:36:04 pm

Title: Star Wars Yoke mounting template
Post by: mytymaus007 on July 09, 2012, 03:36:04 pm

Hey does anyone have a Star Wars Yoke mounting template that you can print out  :cheers:

Title: Re: Star Wars Yoke mounting template
Post by: PL1 on July 09, 2012, 03:43:49 pm

Quote from: mytymaus007 on July 09, 2012, 03:36:04 pm

Hey does anyone have a Star Wars Yoke mounting template that you can print out  :cheers:

Here you go, MM.


Scott

Title: Re: Star Wars Yoke mounting template
Post by: mytymaus007 on July 09, 2012, 05:37:00 pm

Nice your the man thanks for quick reply :cheers:

Title: Re: Star Wars Yoke mounting template
Post by: Gray_Area on July 09, 2012, 09:07:57 pm

Just measure the distance from center to one stud, draw your line, then rotate 90s degrees three times. Or measure between two diagonal posts, draw your line, then rotate 90 degrees. Or, like I did, measure between length and width between posts - it's 4.5 inches - and mark your target accordingly. Or, you could put the yoke on the target, and mark around the studs, then drill.