Build Your Own Arcade Controls Forum

Main => Software Forum => Topic started by: Wildfire on June 17, 2012, 07:44:17 pm

Title: Old Laptop New Life
Post by: Wildfire on June 17, 2012, 07:44:17 pm

ok here is a long shot i am looking to take an old laptop (spec to follow) i have had siting under a desk for a long time and turn it in a a bartop to run SNES, SEGA, MAME, GB and so on it but i am looking for a front end that will run on it. I tryed hyper spin and.... well its not going to happen so I need a front end that will run well on a old system when its done I dont want to see windows at all  hopeing my kids and even my mom could use this so somthing easy to use would be helpfull

laptop specs
HP DV 1000
1.8ghz M Processor
512mb ram (512x1)
WinXP home (just did clean install)
80gb 5400rpm HD
CDRW/DVD-ROM combo drive

Title: Re: Old Laptop New Life
Post by: Le Chuck on June 17, 2012, 07:59:43 pm

MALA will work fine on that system.  Just don't run videos and effects and stuff.  A simple layout with screen shots will suffice. 

Title: Re: Old Laptop New Life
Post by: BadMouth on June 17, 2012, 08:31:08 pm

Hiding Windows:
http://wiki.arcadecontrols.com/wiki/Hiding_Windows (http://wiki.arcadecontrols.com/wiki/Hiding_Windows)

I built a system for my 6yo nephew using an old 600mhz? pentium III and MAME v.80.
MALA ran fine on that, so you have plenty of headroom.  ;D

Only prev game, next game, select & exit were mapped so he couldn't mess anything up.
The only way he's found to screw it up is holding the power button too long or pressing it repeatedly.

Title: Re: Old Laptop New Life
Post by: gonzo90017 on June 18, 2012, 12:30:22 am

You should also consider Mamewah. It runs great on older hardware.