Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: ronnie-dent on June 15, 2012, 06:28:41 am
-
This was a nice clean chassis cleanest I have seen in an old jamma cab, but shortly after purchase the lopt went, I replaced it with one from a scrap chassis which made it work again.
still got some picture bend on the left vertical, also I had to rotate the screen to suit the 60 in 1 which has affected the colours. tried all the pots inc the 50/60hz but not any better
Also tried another chassis with similar results, have also replaced some caps with some I had to hand, any advice apreciated
thanks Ronnie