Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: fvargasfrank on June 03, 2012, 09:42:18 am
-
evil night hardware error
I just bought the machine and everything runs but it gets an hardware error after ck11 pass, I change the cd-rom but that was not the problem, any help would be really appreciate.
-
Anyone? Or any place that or person that would fix it or make it into a shooting mame if it's not to much trouble ?
-
Sorry I can't help with the problem, it's way, way beyond my knowledge :notworthy:. Just wanted to say it sounds like u got 1 bigass serious cab! I wasn't familiar with it, so I googled it and looked at some pics--Wow! Let us know how it turns out, &/or, better yet, post some pics.
-
Oh, & I just checked your profile. Welcome to the forum! :)
-
Anything useful in the manual?
http://wiki.arcadecontrols.com/wiki/Restoration#Game_Manuals.2C_Schematics (http://wiki.arcadecontrols.com/wiki/Restoration#Game_Manuals.2C_Schematics)
http://antelopearcade.com/files/Arcade%20Manuals/EVIL_NIGHT.PDF (http://antelopearcade.com/files/Arcade%20Manuals/EVIL_NIGHT.PDF)
Scott
-
Anything useful in the manual?
http://wiki.arcadecontrols.com/wiki/Restoration#Game_Manuals.2C_Schematics (http://wiki.arcadecontrols.com/wiki/Restoration#Game_Manuals.2C_Schematics)
http://antelopearcade.com/files/Arcade%20Manuals/EVIL_NIGHT.PDF (http://antelopearcade.com/files/Arcade%20Manuals/EVIL_NIGHT.PDF)
Scott
Thank you for that, that's a start. I read somewhere that I might need a patch cd of the game to make it work something relevant to EPROM or something like that.i have the original cd but I don't know we're to get the patch cd or make one.
-
Anything useful in the manual?
http://wiki.arcadecontrols.com/wiki/Restoration#Game_Manuals.2C_Schematics (http://wiki.arcadecontrols.com/wiki/Restoration#Game_Manuals.2C_Schematics)
http://antelopearcade.com/files/Arcade%20Manuals/EVIL_NIGHT.PDF (http://antelopearcade.com/files/Arcade%20Manuals/EVIL_NIGHT.PDF)
Scott
Thank you for that, that's a start. I read somewhere that I might need a patch cd of the game to make it work something relevant to EPROM or something like that.i have the original cd but I don't know we're to get the patch cd or make one.
to be honest, I have no idea what is going on. But i looked into your issue and found this Patcher that from what I gather has done the job in the past.....
http://www.mediafire.com/?0h9l52n2pnkd165 (http://www.mediafire.com/?0h9l52n2pnkd165)
Also, found this
-iamaduck-
"The battery inside the sub-board Timekeeper/RTC SRAM is probably dead.
The game checks the contents of the EEPROM against the SRAM and throws an error if they mismatch. It's a copy-protection of sorts and you can't re-initialise either :/"
-
Anything useful in the manual?
http://wiki.arcadecontrols.com/wiki/Restoration#Game_Manuals.2C_Schematics (http://wiki.arcadecontrols.com/wiki/Restoration#Game_Manuals.2C_Schematics)
http://antelopearcade.com/files/Arcade%20Manuals/EVIL_NIGHT.PDF (http://antelopearcade.com/files/Arcade%20Manuals/EVIL_NIGHT.PDF)
Scott
Thank you for the patch i manage to rip the original cd and patch it but still get the hardware error :banghead:. Does anyone know someone i can send the board for repair a lot of people i try said they don't work on those board.
Thank you for that, that's a start. I read somewhere that I might need a patch cd of the game to make it work something relevant to EPROM or something like that.i have the original cd but I don't know we're to get the patch cd or make one.
to be honest, I have no idea what is going on. But i looked into your issue and found this Patcher that from what I gather has done the job in the past.....
http://www.mediafire.com/?0h9l52n2pnkd165 (http://www.mediafire.com/?0h9l52n2pnkd165)
Also, found this
-iamaduck-
"The battery inside the sub-board Timekeeper/RTC SRAM is probably dead.
The game checks the contents of the EEPROM against the SRAM and throws an error if they mismatch. It's a copy-protection of sorts and you can't re-initialise either :/"
-
Does anyone know someone i can send the board for repair a lot of people i try said they don't work on those board.
-
CoryDee got me going on the right track. :applaud:
Here's a thread that has the answers:
http://www.assemblergames.com/forums/archive/index.php/t-24744.html (http://www.assemblergames.com/forums/archive/index.php/t-24744.html)
Look at the posts between 12-11-2010 and 04-06-2011.
Scott
-
CoryDee got me going on the right track. :applaud:
Here's a thread that has the answers:
http://www.assemblergames.com/forums/archive/index.php/t-24744.html (http://www.assemblergames.com/forums/archive/index.php/t-24744.html)
Look at the posts between 12-11-2010 and 04-06-2011.
Scott
Ha, that is the page I pulled the quote from. Not sure why I didn't post the link to it. More searching pulled the Patcher for games like this.
-
I can buy the Part, but i have no idea how to install it
-
I can buy the Part, but i have no idea how to install it
If you can't find a local electronics/PCB repair shop, maybe you can post a thread like this old one in Buy/Sell/Trade.
http://forum.arcadecontrols.com/index.php?topic=87062.msg914203#msg914203 (http://forum.arcadecontrols.com/index.php?topic=87062.msg914203#msg914203)
Scott