Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: ronnie-dent on May 22, 2012, 10:37:27 am

Title: Seeburg LPC480 help please
Post by: ronnie-dent on May 22, 2012, 10:37:27 am

Looking for some advice, been given this to look at described as not making any selections! on inspection there was a record in the turtable which was spinning, tone are at end of disc? upon moving arm to start of record it played but at a slow speed! played all the way through then did same just hangs onto the record, if I flip the small lever it will park the record then continue to sit there with turntable spinning, flip the arm again it picks it up again.
 
Not familair with these at all! checked the big plug for corroded pins looks ok, slid the mech out the back but can only get it so far with the cables.
 
Any advice on where to start would be very much apreciated
 
thanks Ronnie
 

Title: Re: Seeburg LPC480 help please
Post by: Ken Layton on May 23, 2012, 11:36:38 am

Jump over to the jukebox forum at www.phonoland.com (http://www.phonoland.com) and talk to THE Seeburg expert, Mr. Ron Rich. He has written several books on repairing Seeburg jukeboxes.

Title: Re: Seeburg LPC480 help please
Post by: ronnie-dent on May 23, 2012, 01:15:44 pm

Quote from: Ken Layton on May 23, 2012, 11:36:38 am

Jump over to the jukebox forum at www.phonoland.com (http://www.phonoland.com) and talk to THE Seeburg expert, Mr. Ron Rich. He has written several books on repairing Seeburg jukeboxes.

Thanks Ken, will give that a shot.