Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: iSpaz on May 10, 2012, 04:26:44 pm

Title: Donkey Kong Questions
Post by: iSpaz on May 10, 2012, 04:26:44 pm
Im build a DK machine.  I have an original TKG3-06 Board.

I am need to know a few dimensions on the control panel.  Mainly, what is the exactly height and width of the CPO decal.  I am cutting my own plexiglass and have not been able to find out the original width or height. 

Also,  Im looking to buy a 4 way joystick.  I have 3/4" MDF board and then will have 1/8" plexi.... will i need a (tall) joystick?  or will a small one work?

Im pretty sure I've read this several times, but when using and oiginal board and Im wanting to connect it to a component TV I will need to following to do so: Video inverter - video converter (EGA to Component)?

I was thinking about buying the video inverter from mikesarcade.com along with the JRok video converter.  Any suggestions or am I going down the right path here?

Thanks for any and all help.!!
Title: Re: Donkey Kong Questions
Post by: Gray_Area on May 10, 2012, 06:59:53 pm
Folks on KLOV will know all this, and will love to help you.
Title: Re: Donkey Kong Questions
Post by: iSpaz on May 10, 2012, 09:08:45 pm
Folks on KLOV will know all this, and will love to help you.

Ive tried to get onto their forums but they wont let me in unless I donate money or am referred by an existing forum member :(
Title: Re: Donkey Kong Questions
Post by: MTPPC on May 11, 2012, 01:41:56 pm
Is you name the same on that board, I'll try to refer you.
Title: Re: Donkey Kong Questions
Post by: iSpaz on May 12, 2012, 12:14:05 am
Is you name the same on that board, I'll try to refer you.

my account name on their forums is "bbeckwith"

and that would be greatly appreciated :)