Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Sparky2323 on April 17, 2012, 08:04:09 pm

Title: Megatouch ION Help
Post by: Sparky2323 on April 17, 2012, 08:04:09 pm

The battery on my ION died the other day and I needed to replace it but I made a mistake of taking out the old one for hours before I replaced it with a new one and now the machine won't turn on anymore. I remember this happening to me a few years ago and I know there is a trick to getting it to boot up again but I forgot how to do it.

Anybody out there that could help me would be greatly appreciated!

Title: Re: Megatouch ION Help
Post by: sarge on April 20, 2012, 08:56:36 pm

Short the green and black wires off the ATX power supply with a keyboard hooked up and enter CMOS settings.  Here is a link to what to set depending on the motherboard installed.

http://www.meritind.com/Support_Center/TECH2012.PDF (http://www.meritind.com/Support_Center/TECH2012.PDF)