Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: RedSquirrel on September 28, 2003, 06:25:45 pm
-
My cab is based on lucids design. I have about 26 inchs to fit a tv.
I really wanted to get a 25inch tv, but they are hard to find and are kinda expensive (im looking at used tv's).
There are however several cheap-ish 27 inch tvs I can get my hands on, but the case is whether or not it could fit in the cab.
I have a 27inch tv in my room, but because of the speakers it adds about an extra 6 inches total.
Now if I could find a tv, without side mounted speakers (say 1 inch either side) would it fit?
Anyone used a 27 inch tv in there cab?
any replys thanks.
-
saying that, I have just found a 25inch one. Just hope its still available as im working all day Mon & Tue and I wont be able to have a look till wensday :(
-
I have one that is 25 3/4". Check my website for the model number. It was a sharp tv from best buy.
-
My cabinet is a modified version of Lucid's. I used a 27" Toshiba TV in mine, but I made the cabinet slightly wider (by an inch or 2 if I remember correctly) just so I could fit the TV in. Have you already built your cabinet? I waited until I got a TV so I could build the cabinet to fit it.
-
My cabinet is a modified version of Lucid's. I used a 27" Toshiba TV in mine, but I made the cabinet slightly wider (by an inch or 2 if I remember correctly) just so I could fit the TV in. Have you already built your cabinet? I waited until I got a TV so I could build the cabinet to fit it.
Yeah its pretty much built. Im just having a hard enough time finding used 25inch tvs, and even 27" now to think of it. I might go with a 24inch but ill wait a while and see.
-
I have the Toshiba 27A33 (I think that's the model #).
It's 25 3/4" wide.
I also have a JVC 27" TV (27S33) in another cab that's 25 3/4" wide.
-
I have a 27" Sony that fits the width of my LuSid-based cabinet. The problem for me is the depth of the TV is too much-it sticks out the front. I suppose I could cut a hole in the back and let it stick out there, but I'm planning on replacing the TV with the WG D9200 which isn't as deep.