Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: claudioggs on March 15, 2012, 09:08:04 pm

Title: recommend a MP3 adapter for my Rowe R-91
Post by: claudioggs on March 15, 2012, 09:08:04 pm

Hi,

I bought a non working (error 37) Rowe R-91 for my family room.
Apparently the problem was a bad contact/connector or a dry/cold join in the Mech board, now it' working.
I have a little problem with some record, when the song arrive to the end the arm remain there, I sure it's an easy magnetic micro switch adjustment.

Now I'm thinking to adapt my jukebox to a MP3 system.
Do you know any system like this?
If I can't find something like this I'll connect an Ipod to the amplifier accessory board, do you know I must adapt impedance or something?

Thanks

CLaudio

Title: Re: recommend a MP3 adapter for my Rowe R-91
Post by: Ken Layton on March 15, 2012, 11:11:42 pm

Take a look at this:

http://www.cdadapter.com/rmcmp3.htm (http://www.cdadapter.com/rmcmp3.htm)

Title: Re: recommend a MP3 adapter for my Rowe R-91
Post by: claudioggs on March 18, 2012, 03:54:00 am

dear Ken,

thanks for your advice.
I sent 2 email to stbann@cdadapter.com (Ann Marie ?) without answer (yet).

I saw in cdadapter site different type of conversion kits.
RMC-MP3 allows 200 selections without any modification for my Rowe R-91 CCC 40777305
RCU-MP3 allows 600 or 1,000 selections depending on CCC firmware version, may be a EPROM change will be needed.
CD100MP3 allows 10,000 selections, this kit works with CCC 408322XX

Do you know if CD100MP3 kit could be installed in my R-91?
How may I know the CCC firmware version?
Any other adapter in the market?

Thank you
Claudio

PS, The switch was adjusted, and every things work find :-)