Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: dosmame on February 23, 2012, 09:52:51 pm

Title: k7000 19w7602 top foldover
Post by: dosmame on February 23, 2012, 09:52:51 pm

Hi, I've got a k7000 19w7602 with top foldover that has been the same before and after a cap kit.

I've read a few articles where the 50/60hz pot needs adjusting, but not my specific chassis. If I adjust it nothing seems to happen - should it ?

TIA
DM

(http://dosmame.mameworld.info/foldover.jpg)

Title: Re: k7000 19w7602 top foldover
Post by: buffett on March 11, 2012, 05:34:49 am

have you fixed your problem.

how do you have your synk hooked up.

you should only use pin 10 on the video input header.

Peace
Buffett

Title: Re: k7000 19w7602 top foldover
Post by: dosmame on March 20, 2012, 04:37:51 pm

ah, thanks for the reply

no, it's not fixed, and it's hooked up via a j-pac and pci-e advandevga card

Title: Re: k7000 19w7602 top foldover
Post by: SirPeale on March 21, 2012, 03:19:15 am

Try adjusting your height down a bit.  And, yes, adjusting the 50/60Hz pot should have SOME effect on screen.

Title: Re: k7000 19w7602 top foldover
Post by: lilshawn on March 22, 2012, 02:59:42 pm

Quote from: SirPeale on March 21, 2012, 03:19:15 am

Try adjusting your height down a bit.  And, yes, adjusting the 50/60Hz pot should have SOME effect on screen.

yes adusting the pot should make the foldover worse or cure it.

if it's doing nothing, maybe the pot is damaged.

Title: Re: k7000 19w7602 top foldover
Post by: dosmame on April 15, 2012, 07:54:51 am

Quote from: lilshawn on March 22, 2012, 02:59:42 pm

Quote from: SirPeale on March 21, 2012, 03:19:15 am

Try adjusting your height down a bit.  And, yes, adjusting the 50/60Hz pot should have SOME effect on screen.

yes adusting the pot should make the foldover worse or cure it.

if it's doing nothing, maybe the pot is damaged.

good call, I'll try and find a replacement. thanks.