Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: mrcram on February 11, 2012, 08:38:13 pm

Title: FREE MONITORS KORTEC AND NANAO-working!-GONE GONE GONE
Post by: mrcram on February 11, 2012, 08:38:13 pm
I have already replaced these monitors and do not want to store them any longer.  Please takes these off my hands.  I live in the Portland, Oregon metro area.  Call Ryan (503) 975-0746 if you can pick these up in my garage.  Need to take all of them.  There will be more arcade parts that I will be putting up here later.

26 inch Nanao ms8 monitor (switchable from 25khz to 15khz plug and play) out of a Daytona USA twin cab.  Colors are a little dull but I have not messed with pcb knobs to increase brightness, etc.  Slight screen burn.
(https://lh4.googleusercontent.com/-cq-kUm8BoEE/TnYoVrN7DAI/AAAAAAAAADw/GiRspnc2hjs/s400/daytonascreen.jpg)
(https://lh6.googleusercontent.com/-Yvdo1FUWK2U/TnYoWnmZS4I/AAAAAAAAAD4/3or0icHBYVk/s400/IMAG1378.jpg)
(https://lh4.googleusercontent.com/-OvGccNX0Fyg/TkaiexAC-cI/AAAAAAAAAB8/01TOf_EL7_4/s640/IMG_20110813_090626.jpg)

27inc Kortec VGA monitor 2938F out of a PGA Golf Tour Cab.  Full picture but colors bad on one side.  I was told by TV repair guy that the tube needs to be replaced but chasis was good. (update-flyback and tube gone.  only the chasis board is left.)
(http://img692.imageshack.us/img692/1984/17098319.jpg)

I have another 26 inch Nanao ms8 monitor out of a Daytona USA twin cab.  Not working.  I searched all over chasis and talked to TV guy.  Fuses and everything else test out good on meter but found a burnt out resistor on the back.  Was told it was a simple soder and cheap fix.
Title: Re: Re: FREE MONITORS KORTEC AND NANAO-working!
Post by: mrcram on February 11, 2012, 10:42:42 pm
Sorry, the nanao monitors are 25" not 26.

Sent from my LS670 using Tapatalk
Title: Re: Re: FREE MONITORS KORTEC AND NANAO-working!
Post by: mrcram on February 12, 2012, 02:43:34 pm
Gone!

Sent from my LS670 using Tapatalk
Title: Re: FREE MONITORS KORTEC AND NANAO-working!
Post by: Gray_Area on February 14, 2012, 03:38:57 am
Please put that in the original post title.
Title: Re: FREE MONITORS KORTEC AND NANAO-working!
Post by: mrcram on February 20, 2012, 01:17:17 am
Quote from: Gray_Area on February 14, 2012, 03:38:57 am
Please put that in the original post title.

How about I put my fist in your mouth.  Sorry to waste your precious seconds.
Title: Re: FREE MONITORS KORTEC AND NANAO-working!-GONE GONE GONE
Post by: Ginsu Victim on February 20, 2012, 01:36:14 am
Quote from: mrcram on February 20, 2012, 01:17:17 am
Quote from: Gray_Area on February 14, 2012, 03:38:57 am
Please put that in the original post title.

How about I put my fist in your mouth.  Sorry to waste your precious seconds.

That was a bit much.:lol
Title: Re: FREE MONITORS KORTEC AND NANAO-working!-GONE GONE GONE
Post by: Gray_Area on February 20, 2012, 11:24:46 pm
Quote from: mrcram on February 20, 2012, 01:17:17 am
Quote from: Gray_Area on February 14, 2012, 03:38:57 am
Please put that in the original post title.

How about I put my fist in your mouth.  Sorry to waste your precious seconds.

It's a simple forum decora - and maybe a requirement in posting/updating posts. But, see, I'd have to go look that up to be sure.