Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: kowal on February 03, 2012, 08:11:19 am
-
Hi
everytime I use female DIN8 and AES pinout > modded PS2 RGB cable
I only desoldering capacitors on original cable.
all is fine, image is clear
but I have problem with female scart on my MAK
http://imageshack.us/photo/my-images/12 (http://imageshack.us/photo/my-images/12) ... eo3mi.jpg/
I can't get correct image
is dirty
http://imageshack.us/f/820/dsc0110cn.jpg/ (http://imageshack.us/f/820/dsc0110cn.jpg/)
I think that problem come from GND
my scart pinout
http://imageshack.us/photo/my-images/402/scart.png/ (http://imageshack.us/photo/my-images/402/scart.png/)
is custom PCB on gnd I use jumpers
my mak
http://www.kowal.itcom.pl/Files/senshu/DSC_0110.JPG (http://www.kowal.itcom.pl/Files/senshu/DSC_0110.JPG)
http://www.kowal.itcom.pl/Files/senshu/DSC_0111.JPG (http://www.kowal.itcom.pl/Files/senshu/DSC_0111.JPG)
http://www.kowal.itcom.pl/Files/senshu/DSC_0112.JPG (http://www.kowal.itcom.pl/Files/senshu/DSC_0112.JPG)
http://www.kowal.itcom.pl/Files/senshu/DSC_0113.JPG (http://www.kowal.itcom.pl/Files/senshu/DSC_0113.JPG)
http://www.kowal.itcom.pl/Files/senshu/DSC_0114.JPG (http://www.kowal.itcom.pl/Files/senshu/DSC_0114.JPG)
PCB on left is for pot section RGBS with LM1881