Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: jvlk on January 15, 2012, 12:35:49 pm

Title: Nanao MS-2931 and pc vga connection.
Post by: jvlk on January 15, 2012, 12:35:49 pm

I had my monitor first hooked up through a j-pac, but Andy recommended I hooked up the monitor straight to my pc instead of the j-pac.
But before I do this do I have to switch anything on the monitor, or can I stick it right in the d-sub connection on the monitor?
The d-sub is right next to the current wires which goes to the jamma connector board, Do i have to unplug that or can I just leave it there?

Thx

Title: Re: Nanao MS-2931 and pc vga connection.
Post by: grantspain on January 15, 2012, 12:58:34 pm

res not higher than 640x480