Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: SonGohanX on December 31, 2011, 01:58:05 am

Title: Makvision 29" Tri-sync issues.
Post by: SonGohanX on December 31, 2011, 01:58:05 am

Just replaced the original Toshiba monitor with the Makvision Tri-sync in my DDR machine. From what I understand, the Makvisions are supposedly auto-sync. DDR is a low res game. It is connected via-VGA cable. I've also tried hooking this up to a Pump it up board which displays 640x480. The results were identical.


what I get on the screen: http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/399649_784536186458_42706256_36308713_2093978271_n.jpg (http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/399649_784536186458_42706256_36308713_2093978271_n.jpg)

monitor specs: http://na.suzohapp.com/monitors/49271500.htm (http://na.suzohapp.com/monitors/49271500.htm)

Any help would be greatly appreciated, and I'll be glad to provide any more information necessary.

Title: Re: Makvision 29" Tri-sync issues.
Post by: grantspain on December 31, 2011, 07:04:50 am

either the yoke is not matched to your new chassis or there is a vertical deflection failure on the new chassis