Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: Arm123 on December 27, 2011, 02:13:09 am
-
I have another chassis here that i patched up some bad fractures in the deflection area.
Still wouldnt fire up and the B+ measured +180v
Lifted L103 and the B+ is still +180v, not being regulated by the SMPS. Replaced c114 and all the other caps in the PSU section look good.
What voltage reading should i be getting from the output of pin 6 on IC101 ?
How should i go about check T101 ?..