Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Jasonmm on December 26, 2011, 10:01:30 am

Title: Do all lcd/led tvs/monitors look like this when they are unframed ?
Post by: Jasonmm on December 26, 2011, 10:01:30 am
Hi

Do most lcd/led tvs/monitors look like this when they are unframed ?


(http://i234.photobucket.com/albums/ee35/Jasonmm92/dscf5231.jpg)

thanks Jason
Title: Re: Do all lcd/led tvs/monitors look like this when they are unframed ?
Post by: JohnEDollar on December 26, 2011, 10:52:04 am
Yes, they do.   ;)
Title: Re: Do all lcd/led tvs/monitors look like this when they are unframed ?
Post by: Jasonmm on December 26, 2011, 11:08:07 am
Quote from: JohnEDollar on December 26, 2011, 10:52:04 am
Yes, they do.   ;)

thank you

is there anyway to get this measurement without removing the bezel ?

J
Title: Re: Do all lcd/led tvs/monitors look like this when they are unframed ?
Post by: yotsuya on December 26, 2011, 01:23:28 pm
You building this yourself, Jasonmm?
Title: Re: Do all lcd/led tvs/monitors look like this when they are unframed ?
Post by: Jasonmm on December 26, 2011, 02:42:47 pm
Quote from: yotsuya on December 26, 2011, 01:23:28 pm
You building this yourself, Jasonmm?

nope

I am going to build this ...

http://forum.arcadecontrols.com/index.php?topic=104064.0 (http://forum.arcadecontrols.com/index.php?topic=104064.0)

with the help of my new friends here ..

http://techshop.ws/index.html (http://techshop.ws/index.html)

..
Title: Re: Do all lcd/led tvs/monitors look like this when they are unframed ?
Post by: Paul Olson on December 26, 2011, 04:13:09 pm
Quote from: Jasonmm on December 26, 2011, 02:42:47 pm
Quote from: yotsuya on December 26, 2011, 01:23:28 pm
You building this yourself, Jasonmm?

nope

I am going to build this ...

http://forum.arcadecontrols.com/index.php?topic=104064.0 (http://forum.arcadecontrols.com/index.php?topic=104064.0)

with the help of my new friends here ..

http://techshop.ws/index.html (http://techshop.ws/index.html)

..

I think I would practically live at techshop if we had one here.
Title: Re: Do all lcd/led tvs/monitors look like this when they are unframed ?
Post by: SavannahLion on December 26, 2011, 04:58:37 pm
Quote from: Paul Olson on December 26, 2011, 04:13:09 pm
Quote from: Jasonmm on December 26, 2011, 02:42:47 pm
Quote from: yotsuya on December 26, 2011, 01:23:28 pm
You building this yourself, Jasonmm?

nope

I am going to build this ...

http://forum.arcadecontrols.com/index.php?topic=104064.0 (http://forum.arcadecontrols.com/index.php?topic=104064.0)

with the help of my new friends here ..

http://techshop.ws/index.html (http://techshop.ws/index.html)

..

I think I would practically live at techshop if we had one here.

Heck yeah. The opportunity to regularly work on up-to-date equipment and have a few brains to tap into on occasion rather than working in a cramped workshop I share with my wife on equipment that pre-dates the Kennedy administration. 
Title: Re: Do all lcd/led tvs/monitors look like this when they are unframed ?
Post by: Jasonmm on December 26, 2011, 06:20:12 pm
tell you guys the truth ... I just might go crazy and build this !!

www.mechmate.com (http://www.mechmate.com)

Title: Re: Do all lcd/led tvs/monitors look like this when they are unframed ?
Post by: Unstupid on January 03, 2012, 06:00:38 pm
Quote from: Jasonmm on December 26, 2011, 06:20:12 pm
tell you guys the truth ... I just might go crazy and build this !!

www.mechmate.com (http://www.mechmate.com)



Wy would you build that?  Don't they have a CNC router at the techshop?  You don't want your own...  You don't want a machine taking up all the space in your garage or workshop, you don't want the dust, you don't want the electric bill at the end of the month...
Title: Re: Do all lcd/led tvs/monitors look like this when they are unframed ?
Post by: BobA on January 03, 2012, 07:03:44 pm
Use the tech shop for all you can.  Your effort to build a CNC will not e required until you surpass what the tech shop will allow you to do on their CNS.
Title: Re: Do all lcd/led tvs/monitors look like this when they are unframed ?
Post by: Jasonmm on January 04, 2012, 01:02:08 am
Quote from: BobA on January 03, 2012, 07:03:44 pm
Use the tech shop for all you can.  Your effort to build a CNC will not e required until you surpass what the tech shop will allow you to do on their CNS.

I got big plans ...

plus

I got CnC fever ...

The TS is great, but its FAR (140 miles round trip/ gas money) and TS fee isnt cheap.

I got in early and got the TS guys all excited about the MechMate.

I am taking 13 classes and going at it ....

I live in my forever home ...

Do it right is my thinking ...

Jason   
Title: Re: Do all lcd/led tvs/monitors look like this when they are unframed ?
Post by: Woodshop Flunky on January 04, 2012, 12:42:54 pm
I think the Dallas/Ft Worth metro area would be a very profitable location for a TechShop.  8)
Title: Re: Do all lcd/led tvs/monitors look like this when they are unframed ?
Post by: mountain on January 04, 2012, 03:00:01 pm
Quote from: Jasonmm on January 04, 2012, 01:02:08 am
Quote from: BobA on January 03, 2012, 07:03:44 pm
Use the tech shop for all you can.  Your effort to build a CNC will not e required until you surpass what the tech shop will allow you to do on their CNS.

I got big plans ...

plus

I got CnC fever ...

The TS is great, but its FAR (140 miles round trip/ gas money) and TS fee isnt cheap.

I got in early and got the TS guys all excited about the MechMate.

I am taking 13 classes and going at it ....

I live in my forever home ...

Do it right is my thinking ...

Jason   


Damn Jason! I had no idea you were getting into CNC. Good luck with the build, be patient, the learning curve is worth it.
Title: Re: Do all lcd/led tvs/monitors look like this when they are unframed ?
Post by: Unstupid on January 04, 2012, 03:52:34 pm
Quote from: Jasonmm on January 04, 2012, 01:02:08 am
Quote from: BobA on January 03, 2012, 07:03:44 pm
Use the tech shop for all you can.  Your effort to build a CNC will not e required until you surpass what the tech shop will allow you to do on their CNS.
I got in early and got the TS guys all excited about the MechMate.

So wait... do the not have a CNC router at the Tech Shop?