Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Sentuvilla on December 24, 2011, 12:07:15 am

Title: UAII Plan Woes
Post by: Sentuvilla on December 24, 2011, 12:07:15 am

Really need help with this one.

Don't really understand the variable width measurements that are listed in the plans. Measurements read either WIDTH or WIDTH - 1 1/4''. I assume it would be referring to the width of your monitor or the width of the monitor minus (-) 1 and a quarter inch.

Can anyone please comment on that? North Coast Custom seems to be shut down for the holidays so I cant reach the author.

Title: Re: UAII Plan Woes
Post by: BobA on December 24, 2011, 08:41:15 am

Width is the width of top section panels.  Width - 1 1/4 is the width of bottom section panels as they are smaller due to the top section fitting down over the sides of the bottom section.  1 1/4 is the combined width of 2 5/8 sides. 

Title: Re: UAII Plan Woes
Post by: Sentuvilla on December 24, 2011, 08:36:43 pm

Perfect. Makes sense.

Really appreciate it.