The NEW Build Your Own Arcade Controls

Main => Buy/Sell/Trade - non-retail => Topic started by: Vigo on December 09, 2011, 04:37:08 am

Title: FS: Out of Stock. ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on December 09, 2011, 04:37:08 am
UPDATE: UPDATE- MARCH 2013 - I am closing shop. Thank you for all your support.

I exclusively have a brand new item available, a new encoder called the ZD ReMatch.

The ReMatch is an easy and affordable encoder, just like the regular Zero Delay Encoder (http://forum.arcadecontrols.com/index.php?topic=114744.0), but it has some new features built specifically for arcade fighter stick builder in mind.


Here is the brand new ZD ReMatch in all it’s glory.

(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=103207.0;attach=183079;image)

Here are some of the features unique to the ZD ReMatch:

•   PS3 Home Button support – The PS3 is the console of choice for most fans fighters with arcade controls. At last an easy and affordable board for using with the PS3. The ZD encoder has an input for all the PS3 buttons, right down to the L3 and R3, but only the ZD ReMatch has a button input for the home button, making menu access, game switching, power down, and joystick reassignment simple.

•   Longer USB cable - The USB cable for the ReMatch is over 7 feet long. This gives players ample room to plug a standalone arcade panel to their computer or console and sit across the room with ample cable length. The USB cable also has built in cable bushing so that the cable can be snug fit into a control panel.

•   Joystick wires and 13 button wires included – While the regular ZD allows up to 12 buttons and joystick control panel, it by default comes with enough wires for 8 buttons. The ZD ReMatch has 13 button inputs and comes with wires for every input button.

•   Option for wiring sets to fit Japanese arcade controls – I am now offering the option to choose between Japanese control wire sizes or American/European sizes. I have button wires to fit either the .110 Japanese buttons, or the .187 US button switches. I also offer the option to switch out standard up/down/left/right wires for the 5 wire cables normally used for Sanwa Seimitsu and other Japanese joysticks. (Note: The 5-pin wire I provide is designed for Sanwas. I haven't tested it with a Seimitsu or other 5-pin joystick. Modification to the wire may be needed to match your specific joystick's pinout.)

•   Option for macro button and turbo controls – This board has an optional special function feature to create macro functions. By simply wiring up a button to the macro input on the board, a player may allow the ability to create a preset button combination macro for pulling off combos and finishing moves. Like the regular ZD encoder, there is also an option to set up turbo fire as well.

Here is what you will receive:
1 ZD ReMatch Encoder Board
1 Extra long USB cable
Your Choice: 1 Japanese joystick Sanwa 5 wire cable OR 4 standard wires up/down/left/right joystick wires.
Your Choice: 13 size .110 button wires (for Japanese style controls) OR 13 size .187 buttons wires optimized for Standard Arcade control switches.
1 set of instructions

The final price for the ZD ReMatch will be $22 shipped in the US. International is only the cost difference in shipping added, so PM me for a price quote. Also, when you PM me an order, please specify your wire preference.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on December 09, 2011, 04:37:43 am
Reserved for FAQ
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: CUTWEST on December 10, 2011, 08:19:43 am
(http://i983.photobucket.com/albums/ae315/pnutz313/videoa.gif)
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: NiteWalker on December 10, 2011, 10:06:58 pm
Looks great. :)
One gripe, the usb cable could be longer; 7' is ok, but 10-12' would be ideal.

Not a huge deal though, since most builders use neutrik NAUSB connectors.
Detachable cables ftw. :cheers:

Great job on these. Ordering soon.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: coconutbowling on December 10, 2011, 11:23:18 pm
I'm interested in ordering 2 of these, unfortunately for whatever reason I can't PM at the moment (probably because I just joined). So if there's a way I can contact you, then let me know.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on December 11, 2011, 12:33:59 am
Hi coconutbowling,

Yeah, you need to have 10 posts before you can send a PM. I will send you a PM with the payment instructions, hopefully you will be able to at least read what I send you.

Just post your preferences on which joystick and button wire connectors you want on this thread. I will get the order shipped right after I receive the payment.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Thamanator on December 11, 2011, 01:04:59 am
Same issue as above. I just joined to buy from you, and it won't allow me to PM you!  :(
You can thank Cutwest and his plug at SRK for getting me here.
Are you planning on having any kind of bulk pricing on these or anything? I am in the beginning stages of designing a brand new controller and would like to use these PCBs inside of them, but the controller will be for mass-production purposes, hopefully by april or may of 2012.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on December 11, 2011, 09:32:11 pm
Yeah, Cutwest is an awesome guy, he has been really helping me out a lot! I think it is 10 posts here before PM's can be sent.

Very cool! Yes, I can do bulk pricing. I don't have any bulk prices set and planned out, but just let me know the amount you are interested in, and I can give you a quote. I don't keep a huge inventory on had at any given time, so if you ordered a larger amount, it would probably be an 1-2 weeks added to ship time.

I checked over at SRK just now, I see Cutwest is getting direct orders placed with him. I think I will try to make an account over there and see if I can help him avoid all that trouble. I hope there are not new member PM restrictions over there.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: coconutbowling on December 11, 2011, 10:14:30 pm
Sorry Vigo, still can't PM, so yes, I still want JP connectors for both. Thanks for getting back so quick!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on December 11, 2011, 10:37:26 pm
Sorry Vigo, still can't PM, so yes, I still want JP connectors for both. Thanks for getting back so quick!

No Problem man! I'll get your package sent out tomorrow.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Thamanator on December 12, 2011, 12:29:02 am
Can you PM me payment info as well. I will need to get 1 right off the bat, for my testing purposes and then we'll go from there. I am creating the new controller and I have a friend who is going to sell them (he already has a company set up and in business for a while to do this kind of thing). So once I get it and make sure it is good to go, he will probably have to contact you about the bulk purchase.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Thamanator on December 12, 2011, 12:30:09 am
Forgot to mention I will need Japanese style sized quick disconnects and the JLF style harness options for mine.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: coconutbowling on December 14, 2011, 09:40:35 pm
Item recieved! Thanks again Vigo for everything.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on December 15, 2011, 06:59:43 pm
Great! Thanks coconutbowling! Let me know if you have any questions.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: SavingPrincess on January 02, 2012, 04:41:36 pm
I am interested but can't pm you.  How can I buy two?
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on January 02, 2012, 07:41:30 pm
Hi SavingPrincess,

I have replied back to your PM at the SRK website. Just let me know your option of connectors.

Thanks a lot,
Vigo
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Norixi86 on January 02, 2012, 10:23:22 pm
Hi there Vigo,

I've been trying to get on to this forum over the holidays to contact you in order to place an order for 2 of your board + wires combos. I am working on an arcade cabinet build using a 32" LED TV, a beastly mini-itx pc, two custom-made joysticks, and a PS3.

I have a quick question as well that you may be able to answer. Is there a way to split the USB connection in order for it to be connected to both the PC and the PS3 at the same time or at the push of a button swap the inputs? I'd like to have a one button solution to turn off the PC, turn on the PS3, and switch the controllers at the same time.

I plan on using all Sanwa parts for the arcade sticks since I currently use a MadCatz MLG Tournament Edition stick on my PS3 and for testing to set up my front end etc....

Edit: Scratch the above request Vigo. I decided to go ahead and buy another TE stick due to time restrictions. (My dad goes into surgery on the 28th and I want to finish the project with him before then.)

I would still like to order 1 set though for future prospects :).

Thanks.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on January 03, 2012, 01:56:52 pm
Hi there Vigo,

I've been trying to get on to this forum over the holidays to contact you in order to place an order for 2 of your board + wires combos. I am working on an arcade cabinet build using a 32" LED TV, a beastly mini-itx pc, two custom-made joysticks, and a PS3.

I have a quick question as well that you may be able to answer. Is there a way to split the USB connection in order for it to be connected to both the PC and the PS3 at the same time or at the push of a button swap the inputs? I'd like to have a one button solution to turn off the PC, turn on the PS3, and switch the controllers at the same time.

I plan on using all Sanwa parts for the arcade sticks since I currently use a MadCatz MLG Tournament Edition stick on my PS3 and for testing to set up my front end etc....

Edit: Scratch the above request Vigo. I decided to go ahead and buy another TE stick due to time restrictions. (My dad goes into surgery on the 28th and I want to finish the project with him before then.)

I would still like to order 1 set though for future prospects :).

Thanks.

Hi Norixi86,

I had sent you a PM just now including payment instructions. Please let me know your choice of connectors.

Thanks,
Vigo
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Norixi86 on January 03, 2012, 07:02:27 pm
Thanks for the quick PM Vigo.

I'll have the .110 button wires and the 5-wire connector please.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Thamanator on January 20, 2012, 11:33:02 am
Sorry it took me so long to get back to you Vigo. I need to get two boards for now. Both with Japanese style quick disconnects and 5 pin connectors. Do you happen to know if this board is common ground or not?
I received your email, you sent me all the way back in December. So I already have the payment info. You should be receiving my payment in a couple days.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: testyc on January 22, 2012, 12:16:33 pm
Hi. I'm new to this board, so i can not send you a private message yet.

But i still would like to order such a ZD ReMatch board. I need .110 wires and 4 standard wires (.110 ? , i'll use buttons [hitbox] instead of a joystick).
It would be send to germany, tho.

Would be nice to hear from you. Thank you!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on January 23, 2012, 02:09:42 am
Sorry it took me so long to get back to you Vigo. I need to get two boards for now. Both with Japanese style quick disconnects and 5 pin connectors. Do you happen to know if this board is common ground or not?
I received your email, you sent me all the way back in December. So I already have the payment info. You should be receiving my payment in a couple days.

No worries, I will ship out when I receive payment. As for the ground, I have never wired it up using a common ground. If I understand it right, it uses two grounds.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Thamanator on January 23, 2012, 02:00:02 pm
I will test it as soon as I get it in, and let you know for sure.

Common ground refers to the ability to use the same ground to activate all buttons on a controller, as in being able to touch the ground prong from the circle button to any other button on the controller and get it to actuate that button.

If a controller is not common ground, it cannot be used in dual mods.

If you were referring to the Ground and the S Ground for the USB, that is the main ground in to the board and the shield ground in to the board. That does not necessarily mean that the controller is not common. All approved Xbox 360 controllers have a shield ground, and some are common ground and others aren't. I'll get back to you and let you know regardless.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Thamanator on January 26, 2012, 01:32:39 pm
OK, I got mine in today, and as far as I can tell it is common ground. I will actually have to hook up the turbo/macro/clear buttons in order to check them out, but everything else is definitely common ground. I'll hook it up this weekend completely (all functions) and check it that way, and post back here. If it is indeed common ground, that would make this the cheapest common ground PCB for PS3 and PC. Which would make it very sought after by people dual-modding Xbox360 sticks.

In order for a PCB to be dual-moddable it has to be common ground.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on January 27, 2012, 01:41:59 am
Thank, Thamanator! I appreciate you checking this out. Really good info, I hope everything goes well and look forward to your update.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: gumpie on January 31, 2012, 05:51:25 pm
Hi,

i'm unable to send a pm , but i'm intrested in this board with ".187 buttons wires optimized for Standard Arcade control switches".
So please contact me

need to know what payments and shipments are ?

Thnks Peter   :cheers:
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on February 01, 2012, 01:13:04 am
PM sent! Thanks! 8)
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: gumpie on February 14, 2012, 07:15:35 pm
Hi, i'm still unable to send a pm,

but i was wondering if the new shipment has arived, thanks peter
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on February 15, 2012, 10:25:31 am
Hey, Peter. I am expecting it to come in the mail today! I checked my order tracking and it is on delivery truck to my house right now. :cheers: I still have to do my quality checks tonight, but I should be able to ship again tomorrow. I will PM you payment instructions.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: jmike on February 22, 2012, 12:09:52 pm
PM Sent.

 :cheers:
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: butteroj on March 17, 2012, 12:14:21 pm
Has there been any lag testing done on these?  :dunno
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: sikwidddit on March 19, 2012, 05:18:58 am
Has anyone tried to dual mod these with another pcb? I was trying to dual mod one tonight with a 360 TE pcb and am getting some really funky results. So i am just curious if anyone has successfully dual modded one yet.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Woodshop Flunky on March 22, 2012, 11:56:55 am
Has there been any lag testing done on these?  :dunno

Excuse my ignorance... but what is the lag you ask about... and how would you test for it?

Thanks!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on March 22, 2012, 12:39:21 pm
I have not found any kind of lag on them. Per the designer of the board, they have as immediate a response as possible; it is actually how they got the name "Zero Delay".

If there is an accurate and easy way to benchmark it, I can give it a go. The only method I can think of is Mythbusters style with a high speed camera, which I don't have.

I don't quite know about how to dual mod the board either.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: butteroj on March 23, 2012, 11:18:26 am
Last question, are these boards common ground?
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on March 23, 2012, 12:25:00 pm
If you look a few posts up, Thamanator tested that out for me and found that it was on a common ground. The turbo/macro functions haven't been confirmed though.  :cheers:
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: butteroj on March 23, 2012, 10:00:59 pm
I see. Ill take one :-)
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on March 24, 2012, 11:05:25 pm
I see. Ill take one :-)

PM sent! Thanks! ;)
Please also let me know your choice of connectors.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: bizzazz on April 13, 2012, 01:24:56 am
Hi,

Do you have any more of the ZD Rematch boards for sale?  I was directed here from a different arcade stick forum and am interested in ordering 1 or 2 of these boards.  I am a new member here and seemingly can't PM yet.

Thanks.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on April 13, 2012, 02:18:00 am
Hey Bizzazz - I just sent you a PM. Hopefully you should be able to directly respond to it, but if you still can't, feel free to post here as well.   :cheers:

If you order, just be sure to let me know which wire options you want to go with.

Thanks!!
Vigo
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: bizzazz on April 14, 2012, 11:24:26 am
Payment sent for 1 ZD Rematch board.  I included this info in the Paypal payment as well, but just for redundancy's sake, my choices for the wires are:
- 5 wire cable for Sanwa joysticks
- .110 cables for Japanese buttons.

I'm looking forward to testing this board out.  I build a few arcade sticks for friends who don't have a huge budgets, so the low cost of this board will be very good for them.  If all works out, I will probably be ordering a few more in the future.

Thanks.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: bizzazz on April 20, 2012, 08:23:51 am
Got the board yesterday.  I won't get a chance to wire it up to a stick for a week or 2 yet, but from what I can see, it looks good.  Thanks.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: satori on April 27, 2012, 04:58:26 am
hi
good job.. :) wanted to buy. have question ; did you try to make this wireless for ps3 with bundle? 
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: satori on April 27, 2012, 02:19:07 pm
international costs may differs. How much to europe?
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: jirayasama on June 07, 2012, 11:40:07 am
Hey Vigo,

I am very interested in this PCB to use on a Sanwa build that i have. Unfortunatelly i am not able to send you any PM =/ ... Is there any chance for you to contact me via e-mail? jirayasama@gmail.com, i live in Brazil so you can already send me the costs for this set:

1 ZD ReMatch Encoder Board
1 Extra long USB cable
Your Choice: 1 Japanese joystick Sanwa 5 wire cable (i alreadi have mine, but it does not have the plug on one side)
Your Choice: 13 size .110 button wires (for Japanese style controls)
1 set of instructions

Thanks in advance.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on June 07, 2012, 05:00:59 pm
Hey Vigo,

I am very interested in this PCB to use on a Sanwa build that i have. Unfortunatelly i am not able to send you any PM =/ ... Is there any chance for you to contact me via e-mail? jirayasama@gmail.com, i live in Brazil so you can already send me the costs for this set:

1 ZD ReMatch Encoder Board
1 Extra long USB cable
Your Choice: 1 Japanese joystick Sanwa 5 wire cable (i alreadi have mine, but it does not have the plug on one side)
Your Choice: 13 size .110 button wires (for Japanese style controls)
1 set of instructions

Thanks in advance.
PM replied! Thanks!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Kot on June 19, 2012, 01:32:22 pm
I'd like to order one as well. I'm making a hitbox with combination of Sanwa and Seimitsu buttons, so I will probably need the .110 button wires (I don't really know the difference) and 4 joystick wires. As of shipping, I live in Poland.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on June 19, 2012, 02:06:40 pm
I'd like to order one as well. I'm making a hitbox with combination of Sanwa and Seimitsu buttons, so I will probably need the .110 button wires (I don't really know the difference) and 4 joystick wires. As of shipping, I live in Poland.
Not a problem. PM replied.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Kot on June 20, 2012, 08:35:01 am
Still can't write PMs :) I'd like to order another one with same set of wires (4 for joystick, .110 ones), please send me a message with a price for two boards in one package.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on June 20, 2012, 09:53:20 am
Still can't write PMs :) I'd like to order another one with same set of wires (4 for joystick, .110 ones), please send me a message with a price for two boards in one package.
Replied with new quote! Thanks!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: ArcadeSeeker962 on June 22, 2012, 04:28:19 pm
Hello, Vigo, I just wanted to let you know that I sent you a PM about your ZD Rematch encoder.  :)
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: jmike on June 25, 2012, 12:40:19 pm
PM sent.


 :cheers:
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: 9tea on July 08, 2012, 02:06:22 am
I thought of ordering one soon , just want to ask for a price quote to ship to Singapore ?
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on July 08, 2012, 12:56:01 pm
I thought of ordering one soon , just want to ask for a price quote to ship to Singapore ?
PM replied. Thanks!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: P.H.U. on August 05, 2012, 08:16:01 am
PM sent.  Thanks for all of your effort on this!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: eone on August 28, 2012, 01:33:52 pm
Good day! Is it possible to order 3 ZD ReMatch boards to Ukraine (with Sanwa Joystick and buttons wires/connectors)?
Can I order your boards from eBay? (http://www.ebay.com/itm/ZD-ReMatch-USB-Encoder-PS3-PC-to-joystick-for-MAME-Arcade-Fight-Stick-Controls-/221010870041?pt=Video_Games_Accessories&hash=item3375463f19 (http://www.ebay.com/itm/ZD-ReMatch-USB-Encoder-PS3-PC-to-joystick-for-MAME-Arcade-Fight-Stick-Controls-/221010870041?pt=Video_Games_Accessories&hash=item3375463f19))
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on August 28, 2012, 03:52:33 pm
Good day! Is it possible to order 3 ZD ReMatch boards to Ukraine (with Sanwa Joystick and buttons wires/connectors)?
Can I order your boards from eBay? (http://www.ebay.com/itm/ZD-ReMatch-USB-Encoder-PS3-PC-to-joystick-for-MAME-Arcade-Fight-Stick-Controls-/221010870041?pt=Video_Games_Accessories&hash=item3375463f19 (http://www.ebay.com/itm/ZD-ReMatch-USB-Encoder-PS3-PC-to-joystick-for-MAME-Arcade-Fight-Stick-Controls-/221010870041?pt=Video_Games_Accessories&hash=item3375463f19))
PM replied. Thanks.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: eone on August 28, 2012, 05:24:11 pm
Hello Vigo!
As new forum user I can't send personal messages :( - send me please PM with your email for reply. Thanks.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: MeisterDwarf on September 21, 2012, 01:56:25 pm
Hi Vigo,

Please send me a PM.

Thanks Rune
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on September 21, 2012, 10:20:35 pm
Hi Vigo,

Please send me a PM.

Thanks Rune

Please let me know how many you will need, so I can quote you a total with international shipping. Thanks!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: MeisterDwarf on September 22, 2012, 04:38:40 am
Hi there, How much for 1 and how much for 5 with shopping to Denmark?? Can you mark the package as a gift? Thanks
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on September 22, 2012, 05:21:50 pm
Hi there, How much for 1 and how much for 5 with shopping to Denmark?? Can you mark the package as a gift? Thanks

PM replied. Thanks!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: DAWORM on October 12, 2012, 04:22:09 pm
After 1 year of research and wishing ~ Its time to get off the pot and build me a stick.   Vigo I would like to buy a ZD Rematch ~ Im using Happ Buttons and a Zippyy Joystick (so the American size wires should work)

Please send me a message ~ Time to start building !!!
 
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on October 12, 2012, 04:31:14 pm
After 1 year of research and wishing ~ Its time to get off the pot and build me a stick.   Vigo I would like to buy a ZD Rematch ~ Im using Happ Buttons and a Zippyy Joystick (so the American size wires should work)

Please send me a message ~ Time to start building !!!

PM replied! Thanks!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Waglo on November 06, 2012, 07:03:16 pm
Hi Vigo, I am currently building a 2-player hyperspin mame cabinet, and occasionally put my ps3 inside for more modern games.  I would like to buy two ZD ReMatch encoder boards with joystick wiring for a Sanwa stick and .110 qd for sanwa buttons, please send me a message.  Thanks.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on November 07, 2012, 12:04:59 am
Hi Vigo, I am currently building a 2-player hyperspin mame cabinet, and occasionally put my ps3 inside for more modern games.  I would like to buy two ZD ReMatch encoder boards with joystick wiring for a Sanwa stick and .110 qd for sanwa buttons, please send me a message.  Thanks.

PM replied. Thanks!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: hamburglar on November 09, 2012, 10:53:59 am
Hey Vigo, I would like to pick up one of these rematch pcbs from you. Sanwa stick and .110 wiring please.

-Jason
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on November 09, 2012, 12:16:14 pm
Hey Vigo, I would like to pick up one of these rematch pcbs from you. Sanwa stick and .110 wiring please.

-Jason
PM replied. Thanks!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: hamburglar on November 13, 2012, 09:03:25 pm
Wow, super fast shipping! Got my Rematch today, will give it a go this weekend when I have more time.

Thanks!

(http://i1140.photobucket.com/albums/n574/Jason_Russell/Forums/controller%202/DSC02167.jpg)
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: uoybatsi on November 17, 2012, 05:56:00 pm
I would like to purchase a rematch pcb with the Japanese joystick Sanwa 5 wire cable and 13 size .110 button wires.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Vigo on November 18, 2012, 12:53:51 am
I would like to purchase a rematch pcb with the Japanese joystick Sanwa 5 wire cable and 13 size .110 button wires.

PM replied. Thanks!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Ithilhin on December 10, 2012, 09:17:04 am
Order cancelled
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Rook on December 19, 2012, 10:15:47 am
I really want one of the rematches, but I just registered and can't PM you. can you email me or PM me your contact information?
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Rook on December 20, 2012, 02:15:52 pm
Not to be a pest, but do you still have any in stock? I see in the first post that you're not going to re order until february so i was hoping you still had one in stock. :)
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Nephasth on December 20, 2012, 02:20:00 pm
Not to be a pest, but do you still have any in stock? I see in the first post that you're not going to re order until february so i was hoping you still had one in stock. :)

http://forum.arcadecontrols.com/index.php/topic,129302.0.html (http://forum.arcadecontrols.com/index.php/topic,129302.0.html)
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Louis Tully on December 20, 2012, 02:25:09 pm
.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: jmike on December 20, 2012, 02:28:29 pm
http://forum.arcadecontrols.com/index.php/topic,128938.msg1317690.html#msg1317690 (http://forum.arcadecontrols.com/index.php/topic,128938.msg1317690.html#msg1317690)

Yeah, I believe Vigo's away on Vacation.
(couldn't find the link, thanks LT)
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Rook on December 21, 2012, 11:19:38 am
Thanks, i posted there too :)
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: matter2u on December 24, 2012, 01:34:23 am
I cant PM you I need the standard connectors...not sure how to do this?? Thanks I want one!!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: renns on January 01, 2013, 11:11:17 am
Hi Vigo,

I can't PM yet due to low post count.  Could you contact me with further info on how to order?  I'd like one of these encoder board kits ASAP!  Many thanks!

renns.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: renns on January 02, 2013, 02:00:17 pm
Hey folks - it appears Vigo is still off on vacation.  Is anyone out there able to mail out one or two of these kits (ZD or Rematch - either OK) to Canada?  PM or email renns underscore 99 at boohoo.com.  Make the obvious fix to boohoo.
My son and I have converted an old Circus cabinet to MAME, and have buttons and joysticks mounted, but our attempt at hacking an old keyboard has failed.  These units would solve the problem nicely.

Many thanks!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: renns on January 04, 2013, 10:26:15 pm
Cancel that request - ordered from Ebay.  Hope they arrive soon!
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: 9tea on January 25, 2013, 09:57:51 am
Heys guys , does anyone know i can find a picture to the instruction for the ZD rematch? Need to add a few buttons to my arcade stick but im unsure where to put them.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: AC. on February 06, 2013, 11:50:47 pm
Missed the first run.  I'd be interested on one of these.
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: toopack2 on February 28, 2013, 10:56:14 pm
Do you still have the ZD ReMatch? let me know
Title: Re: FS: New Item! ZD ReMatch Encoder Board with wiring. [USA/MN]
Post by: Tsimi on March 09, 2013, 11:23:06 pm
Edited