Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: rpucci on December 04, 2011, 02:03:54 pm

Title: Trunnion Pin
Post by: rpucci on December 04, 2011, 02:03:54 pm

Hi Am working on my rowe R-86.Trying to take out the gripper arm.I received excellent instructions by Alan and got as far as taking out the trunnion pins which seem to be frozen.So Alan can you advise me what to next.Thanks

Bob

Title: Re: Trunnion Pin
Post by: ami-man on December 08, 2011, 05:36:20 am

Hi Bob,

Have you managed to remove the pins?
If so then you need to pull the gripper bow forward to remove the complete assembly.
Strip it all down and wash all the parts, dry and inspect the all nylon gears for wear also that the back of the gripper bow that the two tabs have not broken off or are worn, if they are this will effect the turning of the gripper bow in operation.

Please let us know how you get on.

Regards
Alan

Alan Hood
ami-man
UK

Title: Re: Trunnion Pin
Post by: rpucci on December 12, 2011, 01:33:00 pm

That was it Alan.The arm was full of grease and dirt.

It's working perfect now.Thanks again.

If I have trouble again,can I private email you.

Thanks

Title: Re: Trunnion Pin
Post by: ami-man on December 13, 2011, 05:25:22 am

Hi Bob,

Not a problem, glad to hear that you have got the jukebox working.

Regards
Alan

Alan Hood
ami-man