The NEW Build Your Own Arcade Controls

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: dextercf on November 23, 2011, 02:56:16 pm

Title: Space Invaders Part II
Post by: dextercf on November 23, 2011, 02:56:16 pm

I am struggeling with this Space Invaders Part II game..
First off, there are three seperate boards in the "module" (pictures in this thread (http://forum.arcadecontrols.com/index.php?topic=115547.0)), this was ok for me at first but later as I have browsed the web some more...

This picture in a thread in another forum (http://www.dragonslairfans.com/smfor/index.php?topic=124.0) appeared to me:
(http://www.dragonslairfans.com/sip2/sound1.jpg)

There are only two boards in his setup, and mines got three. Is this why game won't boot?

Title: Re: Space Invaders Part II
Post by: dextercf on November 23, 2011, 02:59:20 pm

Later, i have discovered that this might be midway board.. And what I got is a Taito.

Also, is it ment that I should have two edge connectors on this thing?
#1 on the top board, for some voltages but mainly sound+controls.
#2 on the bottom board, for the voltages.