Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: AussieCade on November 14, 2011, 06:53:50 am

Title: Does 3/4 (9mm) t molding exist?
Post by: AussieCade on November 14, 2011, 06:53:50 am

Just wondering if 9mm t molding exists? I have found some at 3/4 (25mm) but have to trim because of over hanging and i dont like the look of cut t molding. It may be my method of cutting too. I only use a box cutter.

Any help would be appreciated.

Title: Re: Does 3/4 (9mm) t molding exist?
Post by: BobA on November 16, 2011, 06:43:29 pm

9mm is closer to 3/8 inch than 3/4 inch which is double the size.   Is it really 9mm that you are looking for?

There is 3/8 inch t molding in this list.  Suzo Happ (http://na.suzohapp.com/amusement/acesor/49099900.htm)

Title: Re: Does 3/4 (9mm) t molding exist?
Post by: fredster on November 16, 2011, 09:58:21 pm

Yeah, you can get it from those ebay links that sell it all the time. You should be able to get it in 3/8, 1/2, 3/4" , 1", 1 1/2"

Title: Re: Does 3/4 (9mm) t molding exist?
Post by: AussieCade on November 18, 2011, 02:38:56 am

Quote from: BobA on November 16, 2011, 06:43:29 pm

9mm is closer to 3/8 inch than 3/4 inch which is double the size.   Is it really 9mm that you are looking for?

There is 3/8 inch t molding in this list.  Suzo Happ (http://na.suzohapp.com/amusement/acesor/49099900.htm)

Thanks, yeah i actually need 12mm. Dont know what made me think 9mm. I have the 3/4 and thats a bit too big. So im guessing 1/2 inch would be suffice?

Thanks for the link.

Title: Re: Does 3/4 (9mm) t molding exist?
Post by: FrizzleFried on November 18, 2011, 02:59:24 pm

Well,  12MM is .47244094488 if an inch so I'd say the 1/2 inch stuff is about as close as you're going to come.
 

Title: Re: Does 3/4 (9mm) t molding exist?
Post by: Gonemad on November 22, 2011, 07:42:09 pm

If you are looking for 3/4" then that would be 18mm.