Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: rpucci on November 06, 2011, 04:17:06 pm

Title: Rowe R-86 Stereo Balance Control
Post by: rpucci on November 06, 2011, 04:17:06 pm
Hi On my rowe R-86 my left top speaker is a little softer than the right top speaker.I tried adjusting the stereo balance control but no difference.Is there something else I can try.Thanks
Title: Re: Rowe R-86 Stereo Balance Control
Post by: ami-man on November 07, 2011, 06:39:24 am
Hello,

It sounds as if you have a problem with your amplifier.
Check to make sure that the output package connections are set to the same connection i.e. maximum output connect the pink and violet cables to E6 left and E6 right.

Check the amplifier for dry joints (cold joints USA) on the connection pins, jumper connection plug and connections between the pre amp and driver board stages.

Regards
Alan Hood
ami-man
UK