Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: beatter on October 29, 2011, 04:15:12 pm
-
I've got a WG D9200 that I am tired of doing quick fixes to keep it working. I am wondering if anyone knows of a good place to get it repaired in the Dallas area, preferably north Dallas area.
Depending on the repair costs I may just replace it.
Thanks!
-James
-
please do explain a little more
I've got a WG D9200 that I am tired of doing quick fixes to keep it working. I am wondering if anyone knows of a good place to get it repaired in the Dallas area, preferably north Dallas area.
Depending on the repair costs I may just replace it.
Thanks!
-James
ed
-
My WG D9200 has issues with the yoke staying in place. I'm just wondering if anyone knows a good place to get repairs done in the Dallas area.
-
yes the yoke on them is a little cranky
it heat's up and melt's itself off of the tube
what we use is :black-silicon:,make sure it is black
as it is the high heat stuff
once yoke is in place
u silicon 4-1/2"-2" beed's
at the top of the yoke where it meet's the bell of the tube
this will hold the yoke in place
trick here is to just make sure the yoke and converg are set
turn unit off,and without shifiting the yoke
place the 4 beed's and let sit for and hour
and then test run,it should be fine and your good to go for another 5 year's
ed
-
Thanks! I'll give it a go when I get the chance.
Is this something I can buy at the hardware store or will I have to order online?
-
hardware store
it is called hi temp silicon and is black..that's how u will know it
next best is red,but i perfer black myself
ed