Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: wxforecaster on October 21, 2011, 09:01:20 pm

Title: Which Molex Connector/Pins? (Pac to JAMMA Adapter)
Post by: wxforecaster on October 21, 2011, 09:01:20 pm

I purchased a Pacman to Jamma adapter here:
http://www.jammaboards.com/store/jamma-pcb-to-pacman-cabinet-adapter/prod_273.html (http://www.jammaboards.com/store/jamma-pcb-to-pacman-cabinet-adapter/prod_273.html)

Unfortunately, the the product fails to mention what size the molex connector/pins are. The adapter arrived today and clearly my standard .156 molex connectors/pins are too widely spaced to fit.

Does anyone have one of these that can tell me which molex connectors/pins I need to buy?

Evan

Title: Re: Which Molex Connector/Pins? (Pac to JAMMA Adapter)
Post by: MonMotha on October 22, 2011, 01:42:31 am

It looks like a standard 0.1" KK for the IO header.  That's what most of Jammaboards' products use.

The other connector is obviously a PC HDD power connector.

Title: Re: Which Molex Connector/Pins? (Pac to JAMMA Adapter)
Post by: wxforecaster on October 22, 2011, 08:56:20 am

That's what I needed to confirm! Thanks!

-E