Build Your Own Arcade Controls Forum
Main => Project Announcements => Topic started by: LOOTER on October 05, 2011, 09:04:20 pm
-
This arcade is going to end up in a Mrijuana dispensary.
-
Man, that cab is smoked! :laugh2:
-
what did you use to clog these holes?
-
what did you use to clog these holes?
I used Bondo, I sealed the bacside with duct tape before applying the bondo.
-
:afro: nice
-
I like the neo-geo workbench!
-
So it looks like the joysticks were mounted angled/pointed twoards the screen -Not straight/perpindicular to the screen?
Is that an annoyance when playing, or do people just learn to get by that?
I'm struggling with my own cp build and have tossed out a couple of these angled designs in favor of straight.
-
Players get use to it :P, And i personally usually build my controllers in a angle just to create more elbow room when you have too big guys playing a 2 player game, bu :d :dunnounnot that is my preference.
-
what did you use to clog these holes?
I used Bondo, I sealed the bacside with duct tape before applying the bondo.
If these feel like they will push thru, try JB Weld. It's stronger then bondo. If your going to install plexi on top, I guess it doesn't really matter.
-
I bought HVAC metal & used tin snips to cut big squares that were JB welded to the underside of the metal CP & then filled the topside with bondo (a day after the bottom cured).
Try that out
-
Are you in Fort Collins?
-
Are you in Fort Collins?
That's kind of a random question... or did I miss something?
-
what did you use to clog these holes?
I used Bondo, I sealed the bacside with duct tape before applying the bondo.
If these feel like they will push thru, try JB Weld. It's stronger then bondo. If your going to install plexi on top, I guess it doesn't really matter.
I had to use Jb weld the center punch cracked the bondo.
-
Are you in Fort Collins?
No I'm in Menifee California.
-
BTW, since we are talking about a dispensary, you should know that the best arcade game to play while "enlightened" is Tempest... Dig Dug, Marble Madness, Mr Do and Q-Bert would take honorable mention! ;D
-
Got the holes done now is time to clean them up and prep the CP AND CAB FOR SOME PAINT.
-
Got the holes done now is time to clean them up and prep the CP AND CAB FOR SOME PAINT.
The top holes did not space out correctly but I think the stoners won't care. :banghead:
-
BTW, since we are talking about a dispensary, you should know that the best arcade game to play while "enlightened" is Tempest... Dig Dug, Marble Madness, Mr Do and Q-Bert would take honorable mention! ;D
Tempest is my favorite all time game. I "may" have played it while "enlightened" a few times in the 80's. Lately though, the world is trippy enough for me without any additional help.
-
Got the 27" tv CRT MOUNTED AND SECURED this Tv aint going nowhere. BUT IS TIME WATCH SOME FOTBALL AND DRINK SOME BEER.
-
Back TO THE DRAWING BOARD, going to redo the CP from scratch and cut and bend a piece of stainless steel sheet metal for the lower front center.
-
Back TO THE DRAWING BOARD, going to redo the CP from scratch and cut and bend a piece of stainless steel sheet metal for the lower front center.
Remember, you need 4 buttons per player for NARC....
-
:laugh2: NARC :cheers:
-
Install Polybius on the computer and watch the fun!
-
Back at it :dunno
-
Got it
-
Preliminary layout