Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: portugese pirate on September 10, 2011, 07:05:46 pm

Title: lighting coin door
Post by: portugese pirate on September 10, 2011, 07:05:46 pm

Could I take this harness http://www.ebay.com/itm/MAME-COIN-DOOR-BUTTON-ILLUMINATION-KIT-/360349863650?pt=LH_DefaultDomain_0&hash=item53e6868ee2 (http://www.ebay.com/itm/MAME-COIN-DOOR-BUTTON-ILLUMINATION-KIT-/360349863650?pt=LH_DefaultDomain_0&hash=item53e6868ee2) and attach it to a 4 pin molex and then directly to my psu.......has anyone used this harness before....if so how is lighting and how long is it? Or does someone have a better cheaper alternative? As i said want to run it off pc psu.........thank you for your help as usual

Title: Re: lighting coin door
Post by: Nephasth on September 10, 2011, 07:44:46 pm

Quote from: portugese pirate on September 10, 2011, 07:05:46 pm

Or does someone have a better cheaper alternative?

Wire up your own harness for a couple bucks (if that).

Title: Re: lighting coin door
Post by: BobA on September 12, 2011, 01:27:28 pm

Yes you can attach it to a PS molex connector to get 12V.  If you have a coin door with lights already then you can build your own a lot cheaper.   If you do not have the lights then it is probably a good buy for you.

Title: Re: lighting coin door
Post by: portugese pirate on September 14, 2011, 02:22:51 pm

thanks for the posts.....ordered up some leds and will try to make up a harness to hook up to 12v molex