Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Savannan on August 12, 2011, 09:32:57 pm
-
Ive checked out MK3FAN's videos but he doesnt really give you a how-to on the kick harness. He does a excellent job on the -5v/diode mod for the 6 in 1 jamma switcher thou...
Is there a schematic or a video on how to make a multi-MK kick harness with diodes? What kind of diodes? and where to place the diodes in the harness...
Thanks
-
I'm also interested in knowing how to do this
-
Ok I found this very informative thread
http://forum.arcadecontrols.com/index.php?topic=80036.0 (http://forum.arcadecontrols.com/index.php?topic=80036.0)
It answered some questions but not all....
1) what kind of diode should I use?
2) how many diodes do I need? one for each button or one for each wire on each kick harness?
-
K, started to ask some questions on various sites...slowly but surely getting answers
- Need to solder the diodes to every single wire on all the kick harnesses.
- here are the diodes you need. http://www.radioshack.com/product/index.jsp?productId=2062587&cp= (http://www.radioshack.com/product/index.jsp?productId=2062587&cp=)
- Silicon Switching Diodes (50-Pack)
-
Old thread, but since this started, a board has been made for MultiRotary set ups, and will either work for kick harnesses too or will with slight modification I believe or there has been talk about making one specifically for kick harnesses in multi-jamma type set ups.
forums.arcade-museum.com/showthread.php?t=206182