Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: mytymaus007 on August 11, 2011, 08:46:31 am

Title: Happ 2-1/4" Trackball template
Post by: mytymaus007 on August 11, 2011, 08:46:31 am

I have a tight fit need to know the measurment of the cutout and mounting plate for a 2-1/4" Happ Trackball  :cheers:

Title: Re: Happ 2-1/4" Trackball template
Post by: milkit on August 11, 2011, 08:47:42 am

http://na.suzohapp.com/trackballs/55110100m.htm (http://na.suzohapp.com/trackballs/55110100m.htm)

Title: Re: Happ 2-1/4" Trackball template
Post by: mytymaus007 on August 11, 2011, 12:12:10 pm

Quote from: milkit on August 11, 2011, 08:47:42 am

http://na.suzohapp.com/trackballs/55110100m.htm (http://na.suzohapp.com/trackballs/55110100m.htm)

Thanks Do you know if anyone has a template to layout before cutting

Title: Re: Happ 2-1/4" Trackball template
Post by: milkit on August 11, 2011, 05:18:21 pm

Quote from: mytymaus007 on August 11, 2011, 12:12:10 pm

Quote from: milkit on August 11, 2011, 08:47:42 am

http://na.suzohapp.com/trackballs/55110100m.htm (http://na.suzohapp.com/trackballs/55110100m.htm)

Thanks Do you know if anyone has a template to layout before cutting

not that im aware of, but you could draw one with a ruler based on those dimensions easy

Title: Re: Happ 2-1/4" Trackball template
Post by: Hoopz on August 11, 2011, 07:11:38 pm

http://forum.arcadecontrols.com/index.php?topic=10627.0 (http://forum.arcadecontrols.com/index.php?topic=10627.0)

Did you try that one?

Title: Re: Happ 2-1/4" Trackball template
Post by: mytymaus007 on August 11, 2011, 09:26:11 pm

Quote from: Hoopz on August 11, 2011, 07:11:38 pm

http://forum.arcadecontrols.com/index.php?topic=10627.0 (http://forum.arcadecontrols.com/index.php?topic=10627.0)

Did you try that one?

yes i did not sure how to read that one im assuming the dotted line is the cut out if so let me know theni would be able to use that one