Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: beatter on July 15, 2011, 01:52:24 pm

Title: Happ UGCI Wires
Post by: beatter on July 15, 2011, 01:52:24 pm

I recently got a cabinet that came with a Happ Fighting UGCI, but didn't have the complete wiring harness and I want to add some more buttons. I'm wondering if anyone knows where I can buy new connectors to add my own wires?

The connectors are the kind that you see on motherboard fan connectors (the 3 or 4 pin ones). I don't know if there is a specific name for them or not.

If you know where to find them thanks, or if you know of an easy alternative thanks! :D

Title: Re: Happ UGCI Wires
Post by: beatter on August 01, 2011, 08:11:08 pm

For anyone who may be looking for these, I found some good substitutes.

Pololu has some housings (http://www.pololu.com/catalog/product/1909) and some pre-crimped wires (http://www.pololu.com/catalog/category/71) that will fit the UGCI headers.

I bought some 36" rainbow female-female wires and cut them in half, they worked great for my setup.