Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Donkbaca on June 28, 2011, 07:58:32 pm
-
Sooo... My CP is a bit of a rats nest, since I have xbox controller; led wiring and x-arcade wiring all going to microswitches, so there may be a short somewhere, but here is my issue:
I open notepad, all is cool. If I open the led wiz program and turn on my lights, button presses start registering on notepad. It only happens after I have turned on about 6 or so ports. I was trying to see if it was one port screwing it up, but it appears to be a combination of ports or something.
Any ideas as to why this is happening?