Build Your Own Arcade Controls Forum

Arcade Collecting => Pinball => Topic started by: lilshawn on June 23, 2011, 06:53:17 pm

Title: WPC power board
Post by: lilshawn on June 23, 2011, 06:53:17 pm

Fishtales...

J115...

what is the colored wire pinout for the GI power? (not the yellow - yellow/white) mine is orange/brown/green etc

mine is TOASTED with stray wires burnt out of the IDC  :angry:

i think i have most of the wire positions worked out, but i would like  to double check

Title: Re: WPC power board
Post by: Q*Bert_OP on June 23, 2011, 08:41:08 pm

Starting from pin 1:
Yellow-white
White-brown
White-brown
White-orange
White-yellow
White-yellow
Orange
Orange
Key
Green
Brown
Brown

Refer to your manual for further information  ;)

Title: Re: WPC power board
Post by: lilshawn on June 23, 2011, 10:24:04 pm

Thanks!  ;D

ya my "manual" just shows a " dead end at J115 on the schematic... and the section talking about the GI shows a simplified circuit diagram.... thanks willys!