Build Your Own Arcade Controls Forum

Main => Forum/Website Discussion => Topic started by: krick on June 19, 2011, 01:37:56 am

Title: Dedicated forum for GroovyMAME?
Post by: krick on June 19, 2011, 01:37:56 am

Saint,

Is there any chance of getting a dedicated forum for the GroovyMAME build?

You could even make it a combined GroovyMAME and CRT_EmuDriver forum.

http://mame.groovy.org/ (http://mame.groovy.org/)

Title: Re: Dedicated forum for GroovyMAME?
Post by: saint on June 19, 2011, 01:53:34 am

If the authors/programmers want a support forum I'll be happy to. :)

Title: Re: Dedicated forum for GroovyMAME?
Post by: newmanfamilyvlogs on June 24, 2011, 03:05:51 pm

Didn't they say go for it? Any idea when this will happen?

Title: Re: Dedicated forum for GroovyMAME?
Post by: Calamity on June 24, 2011, 03:47:57 pm

Well actually we just mentioned that in the groovymame thread but I hadn't asked Saint directly yet, so if everybody thinks it's a good idea let's go for it.

Title: Re: Dedicated forum for GroovyMAME?
Post by: saint on June 26, 2011, 05:21:39 pm

Who are the authors of GroovyMame? Is it BitbyteBit or Calamity or? I need to get the request from the author please to make sure it's what they want :)

Title: Re: Dedicated forum for GroovyMAME?
Post by: newmanfamilyvlogs on June 26, 2011, 08:05:27 pm

Bitbytebit is the primary author of GroovyMame, Calamity is maintaining the modified ATI drivers that accompany Groovymame and make it that much more magical.

Title: Re: Dedicated forum for GroovyMAME?
Post by: saint on July 02, 2011, 08:05:51 am

Done!

http://forum.arcadecontrols.com/index.php?board=52.0 (http://forum.arcadecontrols.com/index.php?board=52.0)

Title: Re: Dedicated forum for GroovyMAME?
Post by: jimmy2x2x on July 03, 2011, 01:23:28 am

Is there any chance of adding a link to the jump table thingy?

(https://lh5.googleusercontent.com/-AhFrQZKgWJo/Tg_8pr8vFcI/AAAAAAAAAGE/mS1a_VVQjCc/s640/Capture.PNG)

^ thingy

Title: Re: Dedicated forum for GroovyMAME?
Post by: Gray_Area on July 04, 2011, 01:47:00 pm

Quote from: jimmy2x2x on July 03, 2011, 01:23:28 am

Is there any chance of adding a link to the jump table thingy?

(https://lh5.googleusercontent.com/-AhFrQZKgWJo/Tg_8pr8vFcI/AAAAAAAAAGE/mS1a_VVQjCc/s640/Capture.PNG)

^ thingy

Was just going to post the same.