Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: eugeneclark5 on June 06, 2011, 10:46:35 am

Title: ROWE AMI R-83 disco- no sound problem
Post by: eugeneclark5 on June 06, 2011, 10:46:35 am

Have and AMI r83 that has worked well over the last 2 years, but now is not producing any sound.  I replaced the 4 fuses behind the amp, looked for loose connections, but did notice that one of the 4 red light indicators is not lit.  I also had a remote volume switch connected, but don't know if that could have effected the system.

Title: Re: ROWE AMI R-83 disco- no sound problem
Post by: ami-man on June 07, 2011, 08:09:01 am

Hi Eugene,

What country do you live in?
The amp in the R-83 should be the 125 watt 6-07438-02. The volume control plug does have to be in correct way round.

I assume that the red led you are talking about is on the power supply in front of the amplifier compartment.

Regards
Alan Hood
ami-man
UK

Title: Re: ROWE AMI R-83 disco- no sound problem
Post by: eugeneclark5 on June 10, 2011, 02:44:46 am

Hi Alan,
Live in the US.  Haven't had a chance to check on the connections again, other than to verify that the 28vdc light is not on. the other 3 light indicators are on. 

Thanks for your help.

Title: Re: ROWE AMI R-83 disco- no sound problem
Post by: lilshawn on June 11, 2011, 01:20:28 am

Quote

no sound problem

no problem!  :cheers: no sound problem!

Quote

the 28vdc light is not on

i would check the f1001 (3amp) on the power supply and if it's good, the associated circuit for the 28vdc (bridge rectifier, resistors, diodes etc.)

Title: Re: ROWE AMI R-83 disco- no sound problem
Post by: Kevin Mullins on June 21, 2011, 04:54:00 pm

Just popping in to say "Hi" to a fellow AMI Disco owner.   :cheers:
(mines not all original, but still love it)